Chevy express oil pan bolts

SOURCE: i am replacing the oil pump on a 98 chevy malibu,

take loose the motor mount bolt and jack the front of the engine up to clear the oil pump and remove the pan,.the bolt the runs thru the center of the mounts ,the easiest way ,hope this helps you, thanks robert b.

SOURCE: I NEED ALL TORQUE ON 3.4 CHEVY VENTURE 98 MODEL

go to autozone.com you can get all the spec with the online manuals on there site

SOURCE: 2005 Chevy Cavalier, oil pan has hole from rock.

most of front end and engine cross over support--if hole is small enough clean and make a plug with pop rivet and cold weld epoxy(oil & gas proof) or if bigger use rubber oil plug replacement a plug about 1/2 inch wide used as replacement when oil drain plug damaged or cross threaded most auto stores sell them

SOURCE: My 1998 chevy s10 blazer 4x4 looks to be leaking

no special way, the oil gasket need to change

SOURCE: i need bolt torque specs for a 2006 chevy cobalt

if you just go to a mecanic and ask what are the specks on that they should know but i think if you just tighten them down with an impact wrench till it is really tight after ou start the car it will run like **** then it will work its self out