Fiat strada 1.4 working egr valve location? - Fiat Cars & Trucks

SOURCE: Fiat Strada Spark Plug

Trouble with the Fiat Strada Spark Plugs may lead to serious damage such as pre-ignition or detonation and an expensive repair to the

entire engine system. Expert sales and service reps are standing by to assist you with any Fiat Strada OEM Spark Plug problems,

concerns, advice and any kind of help you may need! Your ultimate satisfaction is completely guarantee

SOURCE: Fiat Strada

Bad transmission.

SOURCE: egr valve location

The EGR Valve Location is typically housed on the intake manifold this schematic may help you
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008822d

SOURCE: Fuel filter location on Fiat Strada

hi..the fuel filter is located between the fuel tank
and the schrader valve.
check it out..
thank u..
kindly rate my response..

ZJ Limited

• 17989 Answers
• Posted on Sep 07, 2009

SOURCE: egr valve location on dodge ram 2005 4.7

The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
   
2. Disconnect the vacuum line from the air cleaner assembly.
   
3. Remove the wing nut that secures the air cleaner housing lid to the base.
   
4. Remove both the air cleaner hosing lid and base.
   
5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.