Cars & Trucks Logo

Related Topics:

T
Tina Perry Posted on Jul 30, 2017

Skoda fabia stereo in safe mode skzaz9g4894266 please help xx

3 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jul 19, 2012

SOURCE: main beam head light do not flash when light are off Skoda Fabia

I have very little tech info on this, but it would likely be the switch that is the problem.

Ad

plymoflee

  • 90 Answers
  • Posted on Jul 20, 2014

SOURCE: Skoda fabia 04 plate ive replaced my aftermarket

Memory is not powered. Check fuses for radio if had is was cut for the last radio check wiring again. If wiring is all complete test at connector for power at the harnes. You should have at least two or three sources of power at harness one for memory one to run the radio and one for the back lighting. You may have more depending on how many options are included.

Abdul Rasheed

  • 567 Answers
  • Posted on Jul 20, 2014

SOURCE: Skoda fabia 04 plate ive replaced after market

You may have the 'backup' supply line switched with the ACC/IGN supply line.Backup has permanent 12V supply. ACC line only have 12v after you turn the key to position 1 or ACC.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Skoda fabia radio how to get out of safe mode 2 been on it for 3 days

notify dealer for code need vin or vehicle and proof of ownership
0helpful
1answer

Hi my the symphony radio in my skoda fabia is stuck on safe mode

hi paul unfortuntly you need a new radio the code was entered wrongly too many times even the dealer cant fix them ok
1helpful
1answer

Radio in my 2000 Skoda Fabia keeps jumping from tuner to cassette mode

It is an internal radio problem, Not worth fixing. Replace it. cheaper.
0helpful
1answer

Why does my skoda fabia epc light come on when driving?

dear. please check the rear brake lights if its working .if not replace rear brake light s.w
0helpful
1answer

Skoda fabia 04 plate ive replaced after market stereo with the original skoda symphony one i put the code in and it works however everytime i restart the var it goes into safe mode

You may have the 'backup' supply line switched with the ACC/IGN supply line.Backup has permanent 12V supply. ACC line only have 12v after you turn the key to position 1 or ACC.
0helpful
2answers

Fuse diagram skoda

u can call me 92122222228
0helpful
1answer

HOW TO GET OUT OF SAFETY MODE RE SKODA RADIO

the code comes on If the battery goes flat or remove . the code comes on a card inside the radio manual . With out this I don't think you can bypass it .Could try the maker of radio they may help.
3helpful
1answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Not finding what you are looking for?

146 views

Ask a Question

Usually answered in minutes!

Top Skoda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Skoda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...