SOURCE: ODB II Code P0236 &
P0236 Turbocharger Boost Sensor A Circuit ange/Performance and P0237 Turbocharger Boost Sensor A Circuit Low. I would check to ensure your Sensor is didnt come unplugged and if not I would replace the Boost Sensor. Thanks for Using FixYa!
Sincerely,
JC
SOURCE: interference engine
all of the engines used in the hyundai's are interference engine's, that does not mean for sure u have bent valves but the chances are u did. source of info Gates timing belt Catalog.
SOURCE: How to adjust headlights on 2001 volvo V40
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
You will have vertical adjustment screws for each independent beam
(separate highs and separate lows, but will be same screw if highs and
lows are the same bulb). You may also have additional horizontal
adjustment screws as well
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
79 views
Usually answered in minutes!
×