Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 22, 2017

Where is the low pressure switch located on a 2010 ford focus

5 Related Answers

Anonymous

  • 62 Answers
  • Posted on May 15, 2009

SOURCE: Low pressure port 2000 ford explorer

im assuming your talking about the a/c low pressure port? it should be on the receiver/drier(steel can with 2 lines hooked to it) or in the lines connecting to it

Ad

Anonymous

  • 161 Answers
  • Posted on Jun 09, 2009

SOURCE: location low pressure port a/c 2000 ford ranger 3.0

I am not sure I thought some of them were on the back of the compressor which makes it hard to see . but one thing for sure follow the low press line towards the evap and you will find it

Anonymous

  • 34 Answers
  • Posted on Jun 26, 2009

SOURCE: AC low pressure port

Go to your closest ford dealer and ask if they have a book showing all the parts and lay outs of your vehicle, or even try e-bay or a book store. But Ford should be able to help you.

Wayne

honeymokey

honeymokey

  • 3113 Answers
  • Posted on May 31, 2010

SOURCE: where is low pressure side port located for 2000 ford focus

Below the pass. headlight. look underneath bumper to find it

Anonymous

  • 19 Answers
  • Posted on Jul 01, 2012

SOURCE: 07 Chevy Aveo, location of AC Low Pressure Switch

LOCATE THE LOW PRESSURE LINE AND FOLLOW IT, THEY ARE GENERALLY NEAR THE FIREWALL AREA, IF THAT DOESNT WORK, TRY A STANDARD HELMS REPAIR MANUAL, AS IT SHOULD BE LISTED THERE. WORST CASE SENERIO, JUST CALL THE DEALERS SEVICE DEPT. AND THEY SHOULD TELL U WHERE ITS LOCATED AT, AS IT HAS WORKED FOR ME IN THRE PAST.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2010 Ford Focus. Where are the freeze plug location on it please?

Question edited for clarity.
Question moved to a Focus category.

There are 4 engines for the Ford Focus Tammy
1.6
1.8
2.0
2.6

They are always on the engine block at front and rear sometimes on the side and sometimes on the top.

Your Google search query is

2010 ford focus (engine size) freeze plug location

Then look at the images tab. This is not normally a home mechanic job!

https://www.google.com/search?q=%E2%80%8B2010+ford+focus+(engine+size)+freeze+plug+location

..
0helpful
1answer

Where is the high pressure valve located on a 2010 ford focus

Low side port comes off of the compressor and goes into the evaporator core and the High side port sits right on top of the accumulator....

if you are adding freon it goes in the low pressure port and it is only fitting that will fit can and hose.. The high pressure side will have about 250-300 psi in it and the can will explode resulting in injury which to ER tip would have more than paid having it done. check YouTube for videos.
0helpful
2answers

2010 ford focus not accelerating when gas pushed

Is engine light on dash? It could be TPS switch (throttle position sensor) on throttle body on engine.
0helpful
1answer

Does the 2010 ford focus have a neutral safety switch

Ifyour car is an automatic it will have a neutral safety switch or sometimes called a trans range sensor.Also some cars have a starter relay in the distribution/fuse box under the hood as well as check the diagram on the lid of the box for a starter fuse.
0helpful
2answers

My 2003 ford focus a/c will only come on when blower fan is on low speed?

Most likely low on refridgerant. ports are difficult to access .In front of passenger front wheel the accumulator is located. low pressure port is on top of it. Try and add a pound of 134a and see if it cools more efficiently. evaporators are common source of leak on these fine machines.
0helpful
1answer

Where is low pressure side port located for 2000 ford focus

Below the pass. headlight. look underneath bumper to find it
0helpful
2answers

Location of low presure port for ac on 2001 ford focuse

Low pressure line comes from the firewall to the back of the compressor.( some models from back of fire wall to accumulator to compressor)
0helpful
1answer

AC low pressure port

Go to your closest ford dealer and ask if they have a book showing all the parts and lay outs of your vehicle, or even try e-bay or a book store. But Ford should be able to help you.

Wayne
5helpful
1answer

Can't find the fitting to recharge the air conditioner

  • The low-pressure service gauge port valve is located on the suction accumulator.
  • The high-pressure service gauge port valve is located on the LH top of the condenser core.

  • To access the low pressure port you have to remove the right front wheel and inner fender.
    Not finding what you are looking for?

    994 views

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    xxxxxx xxx

    Level 3 Expert

    5117 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...