May b crank or cam sensor...or an aftamarket module. Rechec work....bad ignition coil or switch even a worn distributr cap...bad fuel pressur tu. Hav a datastream run..not a a dealer
SOURCE: '72 Ford F100 will not start...
are you getting spark to the spark plugs? you could have a separated wire that looks fine on the outside and not allowing current to the coil
SOURCE: 88 chevy truck 5.7 engine not firing
WHAT I WOULD DO IS TEST THE FUEL PRESSURE SOME TIMES THE PUMP WILL PUMP ENOUGH FUEL TO GET TO THE TBI BUT NOT ENOUGH TO FIRE THE TRUCK. IF FUEL PRESSURE IS GOOD REMOVE THE DISTBURTOR CAP AND INSPECT THE CAP AND ROTOR, CHECK FOR CORROTION N EITHER ONE SOME TIMES IS BUILDS UP AND STOPS THE SPARK. GIVE THAT A TRY GOOD LUCK HOPE THIS HELPS.
SOURCE: 1998 durango 5.2 wont turn over. changed
Crankshaft position sensor? Did you check for a trouble code??? I would have to say at this point there is a code stored in memory.
SOURCE: 1994 chevy S10 2.2 liter pick up cranks but will
have you checked the ECM fuse (5AMP) for the computer,sometimes they will open up and w/o the computer the fuel pump is dead also
32 views
Usually answered in minutes!
Cranks but doesn't turn over? Do you mean crank over and not start or not crank at all? What kind of truck?
×