SOURCE: Type Of Transmission Fluid
Hi, most auto transmissions use DextronII or III if it requires a speciality mineral oil then the dipstick or a warning will be shown in that area.
To confirm your thoughts your local parts supplier will have all the details of fluid capacities and grades/viscosities on file he or she will be glad to provide you with these.
If still unsure or worried? Mitsubishi website www.mitsubishi.com will gleen an abundance of service tips and details.
Good luck!
Paul 'W'
Onyer~EDson(:0)~[><U.K.
SOURCE: transmission fluid
This transmission will use any transmission fluid that is at your local auto parts store. this town cars trans is universal when it comes to the fluid grade.
SOURCE: What type of transmission fluid to use
dextron 3 would be the fluid.
I’m happy to assist further over the phone at https://www.6ya.com/expert/john_4009e70b6376c95f
SOURCE: what type of transmission fluid does a 2009 mazda use
searched internet finally found downloadable specs at mazdausa.com that showed the ATF M-V for tranny fluid
Hello
The engine
and automatic transmission in this vehicles drive train
are fully electronically controlled by a computer called the PCM and
TCM (Power Train Control Module, Transmission Control Module). When a
problem like this or other drive-ability related problems occurs the
computer stores a record of the problem (there are of course some
exceptions to this, like the fuel pump, engine coolant temperature
sensor and MAF sensor for instance) in the form of a fault code in
its memory, to read these fault codes you must have the systems
memory scanned with a special tool. Once the fault code(s) are read
you then must perform the appropriate diagnostic testing to find and
resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL
A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR
HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
314 views
Usually answered in minutes!
×