At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The dealer is the only place you can buy these types of parts, they will have parts breakdowns on computer, you just show them what you need from those exploded parts diagrams.
Get a manual from an auto parts store specific for your vehicle. In it, you'll find exploded parts diagrams and step by step instructions on how to replace those parts
Go to a junkyard and buy the carburetor off another truck. Parts are not generally available for 29 year old carburetors. Then make one good one out of the two old ones and your kit. If it is a you can probably buy a new carburetor from Holley to fit the truck. They are expensive. Good Luck.
Rebuilding an automatic transmission requires more than looking at a diagram. Check out faxonautoliterature. They have the original Ford service manual for your truck and it will have all the information that you will need to rebuild your trans properly. Hope this helps.
If your talking about the heater pipe and hose under the intake....(to ease removal you can remove the inlet air cowl/wipers/etc.) remove upper intake/coils/fuel line etc. the tube is bolted to the back of the RT head...replace the entire tube/hose assemble....IF the tube at the frt of the block is corroded/damaged/etc. you will need to replace that also (remove waterpump for access and installation)...change you T/Stat at this time also....hope this helped you...GL
I have a 1990 250 van, you can find a wiring diagram below. Wiring diagrams for a lot of vehicles (but not all!)
go to autozone . com
repair info (on the left)
vehicle repair guides (center panel)
put in your vehicle info
select chassis electrical
then wiring diagrams (on the right, bottom of the list)
Reach deep down in your pocket for a $20 bill, use it to buy a haynes manual from your local parts store, amazon or haynes.com. The time and blood you save may be your own;~). If this manual doesn't save you more than $20 of your time ... then you don't value your time much. All diagrams for everything, clutch, tranny, full motor rebuild, suspension, wiring .. you name it.
good luck,
×