NOTHING JUST LOOKING FOR ANSWERS SO I CAN GET THIS FIXED TONIGHT
SOURCE: 98 Mazda 626 Won't Crank, Won't Jumpstart, no power on anything
Either one of your cables isn't getting a good enought contact on the battery or solenoid, or the solenoid is bad, or relay for starter is bad.
SOURCE: mazda 626 with no spark
be for you dig to deep into something like that take off the distributor cap and then pull off the rotter and check your connection at that point. that part might have to be changed
SOURCE: My Mazda 626 Wont go into Drive
Sounds like you have lost the transmission. There are bands that clamp down to lock the transmission into the gear you want. They are controlled by a hydrolic unit located in the trans. The first thing I would do is have a shop pull the trans oil pan and see if it is full of chips of metal. If so you definately have a problem. At the same time they can look at the bands and see if one of them is broken. another cause would be that metal has gotten into the hydrolic valve body and frozen the drive band portion so it will not function. You may also get lucky and have it be an internal adjustment of the drive band. Good Luck, RAC
SOURCE: cost to replace waterpump on mazda 626 1996
Go to (repairpal.com) and enter all your info & pick repairs for pricing in your area.
SOURCE: transmission in 1996 mazda 626 slow to shift high rpm
if its reving high then shifting then your trannys going
96 views
Usually answered in minutes!
×