At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The tightening torque specifications for the Mitsubishi 4D35 engine can vary based on the specific component you're tightening and its location on the engine. Here are some general torque specifications for the Mitsubishi 4D35 engine:
Cylinder head bolts: 70 Nm
Connecting rod bolts: 40 Nm
Main bearing bolts: 70 Nm
Flywheel bolts: 120 Nm
Rocker arm adjusting screw: 10 Nm
These are just general specifications, please refer to the engine manual or consult a professional for the correct torque specifications for your specific engine. It's important to use the correct torque specifications to ensure proper engine performance and longevity.
Sure, here are the main torque specifications for a 1991 Mitsubishi Canter 4DR7 engine:
Main bearing cap bolts: 43.51 lb-ft (59 Nm) + 90 degrees
Connecting rod nuts: 50.59 lb-ft (68.6 Nm) + 90 degrees
Cylinder head bolts: 55.31 lb-ft (75 Nm) in the first step, then 110.63 lb-ft (150 Nm) + 90 degrees
It is important to follow these torque specifications carefully to prevent damage to the engine. If you are not comfortable tightening the bolts yourself, it is best to take your car to a qualified mechanic.
Here are some additional tips for tightening engine bolts:
Use a torque wrench to ensure that the bolts are tightened to the correct specification.
Tighten the bolts in a star pattern, working from the center out.
Do not overtighten the bolts, as this can damage the threads.
By following these tips, you can help to ensure that your Mitsubishi Canter 4DR7 engine is properly maintained and will last for many miles.
Sure, here are the torque specifications for the flywheel, rod & main bearings, and head bolts for a Mitsubishi Canter 4D32 engine:
Flywheel bolts: 77.46 lb-ft (105 Nm) + 90 degrees
Connecting rod nuts: 37.38 lb-ft (50 Nm) + 90 degrees
Main bearing cap bolts: 27.31 lb-ft (37 Nm) + 90 degrees
Cylinder head bolts: 40.59 lb-ft (55 Nm) in the first step, then 90.63 lb-ft (123 Nm) + 90 degrees
It is important to follow these torque specifications carefully to prevent damage to the engine. If you are not comfortable tightening the bolts yourself, it is best to take your car to a qualified mechanic.
Here are some additional tips for tightening engine bolts:
Use a torque wrench to ensure that the bolts are tightened to the correct specification.
Tighten the bolts in a star pattern, working from the center out.
Do not overtighten the bolts, as this can damage the threads.
By following these tips, you can help to ensure that your Mitsubishi Canter 4D32 engine is properly maintained and will last for many miles.
×