Need diagrahm 1999 cabrio? - 1999 Volkswagen Cabrio

YES WITH SOME MINOR MODIFICATIONS.BEWARE!!!!!I NEED VIN TO CHECK PART NUMBERS FIRST!!

what kinda diagrahm Battery to where ? starter, ignition sw, alternator ?

should self bleed through i would have thought .

be sure to view the belt diagrahm...locate the tensioner pulley and insert the drive end of your 3/8 drive ratchet into the square slot in the tensioner...move your ratchet clockwise, you should see the belt loosen...then lift off, when replacing with the new belt...install over pulleys...you will need to twist the tensioner pulley with the ratchet to install over the final pulley...release and belt should remain tight...again check the belt diagrahm for belt accuracy before test running...:)

the bearing has to pressed in, if you have a press great if not remove the hub assemble and take it to a machine shop

Here is a link to the diagram you've requested. Best of luck to you!

http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001Z&l=n&catalog=auto&category=2

hi, if you have the original stereo, this is the problem, disconnect your stereo, the stereo is connected to the alarma.
To remove the stereo you need two thin plate, put the plates in the slots above the buttons power and mix, and pull the stereo.

you need another transmission

s6024 diagram

I don't have the fuse box cover and need to replace the fuses that are missing.