Go by an auto parts store and have the codes read most parts stores will test for free then come back and post the code # not the description given by the scanner. I would suggest not letting them erase the codes because the mechanic that works on it needs that information.
What you need OBDII scanner to read codes,or go to Autozone may check for you,
??There are two types of DTC's, 1 trip DTC's and 2
trip DTC's
??A 1 trip DTC is for a condition that requires
immediate attention such as a catalyst damaging
misfire.
??A 2 Trip DTC is one that a condition must be found
during 2 consecutive trips such as an EGR fault.
??Most Monitors do not set a DTC and light the MIL
when a vehicle fails a test for the first time during a
DRIVE CYCLE. If a test is failed on a second
consecutive DRIVE CYCLE the MIL will light and a
DTC is stored in the vehicles powertrain control
module (PCM).
59 views
Usually answered in minutes!
×