Cars & Trucks Logo

Related Topics:

Carl Cimon Posted on May 09, 2014

What is de idle trouble 2011 jeep liberty? - Liberty Jeep Cars & Trucks

1 Answer

A

Anonymous

You or a shop will have to check alldata or
a service bulletin,but I believe even after
any repairs or if you have no problems,that
the throttle body has to be calibrated or a throttle
relearn done with a scan tool

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the fuel filter on my 2011 jeep liberty

moved to tank in 2006

http://jeepdied.com/#fuel_filter

3.7L
is yours diesel
0helpful
1answer

I have a 2011 jeep liberty and when I try to connect my phone threw uconnect it says not equipped with u-connect phone

Some vehicles may say it has it however it is an option....Call any jeep dealer and they will instruct you how to get it turned on...
0helpful
1answer

Why my 2011 jeep liberty have troubles on idle?

idle controller will need cleaning, you will need to remove it and clean it out it sits on the intake under the intake pipe has some wire going into it, remove the unit and clean out with some carb cleaner spray it in side and cover the opening with your hand and shake it around so the cleaner gets every were do this a few times and then tip out the gunk before refitting also clean the inside top of the intake using carb cleaner and a cloth. when dry spray some wd40 in the idle controller drip it out and re fit the unit. should be fine after this cleaning is done.
0helpful
1answer

2011 jeep liberty....Heater fan does not work at all

blown fuse, if fan dead on high.
open operators guide turn to fuse page, bingo. blower.
0helpful
2answers

(26,3,1,32) fehlercode v63.7 jeep liberty help

necesito un diagrama de la cadena de distribucion de un jeep liberty 3700
1helpful
1answer
0helpful
1answer

Hola tengo una jeep liberty 2002 y me prende el foco del aceite cuando esta fria, le cambie el aceite hace un casi ya un mes y prende al acelerar y suelto y se apaga.

Podria tratarse de una falla con el sensor de presion de aceite, no el de nivel, sino el de presion. Intente escanear el computador a ver si aparece algun codigo de falla.

Suerte.
0helpful
1answer
Not finding what you are looking for?

113 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...