Question about 1989 Oldsmobile Delta 88

1 Answer

I want to replace flasher on 89 olds 88 where is it

Olds 1989 88 flasher need to be replace wherte is it

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

If you mean the blinker bulb, they are either set in behind the front bumper, where you see the orange/white colored glass (directly beneath the headlights)....OR the side blinkers, which are accessed by opening the hood and reaching in from the inside.

The rear blinkers are able to be accessed by opening the hood, and removing a small (phillips head) screw on the top of the vertical tail light housing. These lights serve as blinkers and brake lights, and there are two in each housing. Hope that helps! :)

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My flasher on my 89 Isuzu don't. Work where would the fuse be for it


in the fuse box.
see turn fuse.
old cars have 2 boxes, some 4
one in cab ,one in bad (engine)
so the cab box has it. normally

you never posted a car.? 89 what?
here is a list
pick one and say?

http://en.wikipedia.org/wiki/Category:Isuzu_vehicles

May 26, 2015 | Isuzu Cars & Trucks

1 Answer

My blinkers are not working.I replaced fuses and flasher.My hazard lights work but my blinkers still dont.What else could I check.


are you sure you replaced the signal flasher and not the hazard flasher as they look the same.put the hazards on and check to see if it was the one you replaced.if it is then you need to located the signal flasher and replace it.if you still have the old one you replaced you can use it.

May 01, 2011 | 1997 Ford Thunderbird LX

1 Answer

Where is the place I need to access on an 89 Pontiac Boneville to fix the turn signal?


TO CHECK FLASHER TO THE RIGHT SIDE OF FRONT ASH TRAY,HAVE TO DROP PANEL DOWN AN THERE IS A FLASHER ON FUSE PANE DRIVER SIDE KICK PANEL OR UNDER THE HOOD NEAR BATTERY

Dec 19, 2010 | 1989 Pontiac Bonneville

1 Answer

Have a 89 dodge raider;;have no turn//4-way flashers or brake lights;;all fuses good;have power to brake light switch and leaves switch when apply brakes;;found round flasher[4 way flasher]know this...


Hey HotrodHarley,
I would pull out your hazzard switch and clean it real well. the signal, brake lights are connected to the hazzard switch and if it doesn't fully disengage you wont get the brake lights or the flashers to come on. It happened to me on my 89 Raider last year.

Oct 27, 2010 | 1987 Dodge Raider

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

1 Answer

Turn signals don't work on '89 taurus gl. Fuse is good, flasher is new. I tried a different turn switch on the column but still nothing. Wiper, washer and highbeams work on the switch just not the trun...


still sounds like the multi-function switch on the column. If you have old one, take apart and look for discolored coating on copper strips. clean with emery cloth and add di-electric grease.

Jun 30, 2009 | 1989 Ford Taurus

2 Answers

Where is the flasher located in my oldsmobile cutlass 1989


the flasher is located on on the right side of the steering column. To get to it take off the ash tray and you can just see it.

May 04, 2009 | 1993 Oldsmobile Cutlass Ciera

3 Answers

Turning signals have quit flashing. bought a elecronic flasher but not a clue where it goes


I had to use a pair of vise grips on the receiver to get a good enough grip and pull the plug like heck. There is another flasher for the emergency flashers located to the right side of the glove box (glove box has to be removed) on the far side of the alarm box for "keys left in ignition"

Jul 25, 2008 | 1989 Oldsmobile Cutlass Ciera

2 Answers

Location of the turn signal flasher


when you turn on the blinkers do they stay a steady on?
if so then on bulb is not the right one or one is not working

Jun 30, 2008 | 1987 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...