Delete bluetooth phones

Best Manuals


for the best solution of your problem visit this site

have you made sure with nokia site that this blue tooth is compatible with your phone??

is you phone not even detecting the device?

Delete all the old Bluetooth info and reprogram it

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_4c166ba81493f541

Using the
"
Delete
"
Command
1. Press and hold
b
g
for
two seconds.
2. Say
"
Delete.
"
3. Say the name tag you want to
delete.
Using the
"
Delete All Name Tags
"
Command
This command deletes all stored
name tags in the Hands
-
Free
Calling Directory and the OnStar
Turn
-
by
-
Turn Destinations Directory,
if equipped.
To delete all name tags:
1. Press and hold
b
g
for
two seconds.
2. Say
"
Delete all name tags.
"
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the
"
List
"
Command
1. Press and hold
b
g
for
two seconds.
2. Say
"
Directory.
"
3. Say
"
Hands
-
Free Calling.
"
4. Say
"
List

You will have to take it to a person or garage that has a capable scanner to erase the other numbers. Or a dealership.

press the phone button, use the tune knob to get to bluetooth device, and delete devices, press OK. when you go back into the phone, it will ask to add a device. Search for bluetooth device with your phone, enter PIN. Done.

call a dealer and ask a tech or buy a haynes manual or go to library sec629

To remove an unused Bluetooth phone from your Lexus 350 system, follow these steps:
1. Press the menu button on the center console
2. Select setup
3. Then Bluetooth
4. Then registered devices
5. Selec remove - you will be given an option to remove all or a particular device
6. Once selected press remove
7. Confirm your choice
Remember, when a device is removed, all phone book data that came with it will also be wiped out.

Hi. There is an option to forget bt devices. Forget all of them. Pair your phone again automatically

Turn on your NAV screen and go into the info main menu in the Nav system. If no NAV refer to the drivers handbook, since you will sinc by using the voice command buttons on the steering wheel and the car will offer you prompts.
Click on telephone, settings, Bluetooth, ADD PHONE.
Then go into the menu for the Curve, tools , add devices,enable handsfree, search new device are the icons you need. You will need to authorize the Curve to accept a new device by entering a 4 digit pin code, which will show on the car`s screen. Once completed, the car will acknowledge the Curve in it`s screen