The airbag light stays on. I have checked the fuse and it's good. I did add an after market radio. A while back.
Hey, my mate had the same problem, just in a Mini, he went to a garage and they told him the sensor in the passenger seat was broken, and the entire seat needed to be changed, costing around 2.250$. He searched a little around and found an airbag emulator, that gets your system to think someone is always seated. In case of an accident the airbag will ALWAYS go off, on both driver and passenger seat. He found it on amazon: http://www.amazon.com/gp/aag/main/ref=olp_merch_name_1?ie=UTF8&asin=B00E3C1IPW&isAmazonFulfilled=0&seller=A3VPDTQ49IXC7U - it is a quick fix, but a solid one.
SOURCE: Airbag dash light
Transport Canada Vehicle Recalls & Defects Database Transport Canada Recall # 2007169 Recall Date: 2007/05/30 Notification Type: Recalls Audit System: Airbag Manufacturer Recall Number: G09 Units Affected: 51,000 Category: Minivan Recall Details: On certain vehicles the left or right front supplemental airbag sensors may crack under certain conditions, which can allow water to enter into the sensor. This can cause the airbag warning lamp to illuminate. A malfunction of one or both of the supplemental sensors will not adversely affect safety or cause a failure to comply with government standards. The single-point sensor in these vehicles, which is located in the airbag control module, is operational even if both supplemental sensors are inoperative. DaimlerChrysler has decided to launch a Customer Satisfaction Notification to advise customers that these front airbag sensors will be replaced with redesigned sensors to reduce the potential for damage. This action is not being conducted under the Motor Vehicle Safety Act.
SOURCE: airbag light stays on, fuses ok.
The airbag light will come on and stay on as long as there is an active code in the system. It will go off when the code goes to stored. Active means, something is malfunctioning right now so we will turn the light on. Stored means, something malfunctioned but is working now so we'll store the code in memory and turn the light back off. You really need to have the codes checked for an accurate diagnosis.
SOURCE: 2006 ford e250 van\r\rear tail lights dimmed and now dont work(.)
check the fuses and relays under the hood next to the battery. if they still dont work it might be in the wiring or if it has a tow package it might be in the trailer wiring
210 views
Usually answered in minutes!
×