This light was on. I took the car to Belle Tire for scan. I noticed a tire was low. Belle Tire serviced the tire but was unable to scan because their scanner was broken. When I picked up the car, the SES light was off. I have restarted several times and no longer see the light. Could the light have been triggered by the low tire pressure?
SOURCE: lexus ls430 2004 tire pressure indicator
Veve713:
You probably didn't need new tires unless you had some miles on it. Remember that the spare tire also has a pressure monitor as well. It most likely is causing the low tire pressure light on the dash and only needs to be inflated back to what ever your other tires are set to. I had the same problem on my RX and took it back to the dealership where they told me since the spare is exposed to the same elements (it's under the back of the RX - you have to use the tire iron to let the spare down), it will inevidably lose air.
Good luck.
MDGolfHacker
SOURCE: 2006 mini cooper low tire pressure light on
Hold down the reset for a few seconds until the light goes out. If this does not work, repeat.
SOURCE: low tire pressure light is on all tire pressure is
Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.
SOURCE: Tire Pressure indicator
hold reset button for about 10 seconds. your tire pressure would reset
SOURCE: lexus ls430 2004 tire pressure indicator
Contrary to popular belief the indicator light does not reset itself. Once you put in the proper tire pressure in all tires including the spare you must reset the indicator light. The reset button is located on the driver side underneath the dash panel. Stick your on the break pedal, turn and look up. You will see the reset button. With th engine on and park break on,push and hold te button for 5 seconds. The indicator light will turn off and you are all set.
125 views
Usually answered in minutes!
×