What is code SA0 SPN3363 FMI 2 - Cars & Trucks

Very specialized field. Error codes and a link to maker support.

https://www.google.com/search?q=Dynapac+cc1200+vi+fault+code+Spn+3328+fmi+5

..

Shut down the generating set engine before filling the fuel tank. ...

The service and repair manual will provide you all the knowledge step by step to locate and fix the problem on your own easily and you will get the manual from the given link https://toolsnyou.com

The best solution you'll get fr om books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

You must have the codes diagnosed the parts needed replace and the light will go out.

The codes are typically stored in the computer which controls the particular circuit it controls and unhooking the battery cable does not reset the codes.

The code means that the temperature in the catalyst is not high enough to support hydrocarbon conversion. Some ways to troubleshoot are:
1. Replace the EGR cooler
2. Check for exhaust leaks
3. Install clean DOC and DPC
4. Check that there are no issues with the 7th injector, fuel metering block for injector, WGR cooler, the engine's wiring and DPF sensor
5. Check if the 7th injector is receiving good voltage when the car is on
6. Replace the wire harness if the issue is persistent
If the issue isn't fixed now, drive down to the nearest mechanic.

These code are specific to Volvo and you will probably need to contact a Volvo service department to have them explained.

Year, make, model, engine size?

AM / FM RADIO
Setting Preset Stations
The six numbered pushbuttons let you return to your
favorite stations. You can set up to 18 stations (six AM,
six FMI and six FM2) by performing the following
steps:
1. Turn the radio on.
2. Press AM FM to select AM, FMI or FM2.
3. Tune in the desired station.
4. Press and hold one of the six numbered pushbuttons until you hear a beep. Whenever you press that numbered pushbutton, the station you set will return.
5. Repeat the steps for each pushbutton.


RADIO WITH CD ( BASE LEVEL)
Setting Preset Stations
The six numbered pushbuttons let you return to your favorite stations. You can set up to 18 stations (six AM, six FMI and six FM2) by performing the following steps:
1. Turn the radio on.
2. Press AM FM to select AM, FM1 or FM2
3. Tune in the desired station.
4. Press and hold one of the six numbered pushbuttons until you hear a beep. Whenever you press that numbered pushbutton, the station you set will return.
5. Repeat the steps for each pushbutton.


RADIO WITH CD (UP LEVEL)
Setting Preset Stations
The six numbered pushbuttons let you return to your favorite stations. You can set up to 30 stations (six AM, six FMI and six FM2, six XM1 and six XM2 (USA only, if equipped), by performing the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FMl, FM2, or XMI, or
3. Tune in the desired station.
4. Press EQ to select the equalization.
5. Press and hold one of the six numbered XM2. pushbuttons until you hear a beep. Whenever you press that numbered pushbutton, the station you set will return and the equalization that you selected will also be automatically selected for that pushbutton.
6. Repeat the steps for each pushbutton.


Additional details could find in your Owners Manual; hope this helps (remember to rate this answer)