I have a misfire in cylinder 5 on a 2005 hyundai tucson

It sounds like something not put back correctly or adjusted. Was the slave cylinder arm push in when you bled the system? There may be air behind it. Did you use a pressure bleed system, slave up to Master. Lots of help in the links.

https://www.google.com/search?q=2005+6+hyundai+tucson+clutch+master+cylinder+replacement

https://www.google.com/search?q=2005+6+hyundai+tucson+clutch+adjustment

The location of the number 1 cylinder in a 2008 Hyundai Tucson is determined by the engine type and layout.
Hyundai Tucson 2008 models comes with 2 different engine types :

• 2.0L I4 engine
• 2.7L V6 engine

In both engines, the firing order is 1-3-4-2, and the cylinder layout is inline or straight.
The cylinder layout of the 2008 Hyundai Tucson with 2.0L I4 engine is inline 4-cylinder, meaning that the cylinders are arranged in a line, one after the other. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side.
The cylinder layout of the 2008 Hyundai Tucson with 2.7L V6 engine is V6 engine, meaning that the cylinders are arranged in a "V" shape. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side, and it's the first cylinder on the left bank.

Search Results

2005 Hyundai Tucson Recalls - Cars.com

www.cars.com/recalls/hyundai/tucson/2005/

Cars.comLook up all NHTSA vehicle safety recalls for your 2005 Hyundai Tucson, and contact a nearby service center for free repairs.

2005 Hyundai Tucson Problems, Defects & Complaints

www.carcomplaints.com/Hyundai/Tucson/2005/
7 days ago - The 2005 Hyundai Tucson has 199 problems & defects reported by ...January 11: Hyundai Genesis Recalled to Replace Dangerous Tires ...

Hyundai Tucson Recalls ' RepairPal

repairpal.com > Recalls > Hyundai
Other systems that may be affected include: cruise control, push-button start, gear shifter, and Electronic Stability Control (ESC) system. Dealers will replace the brake light switch to correct this concern. ... The stop lamp switch may fail, affecting many vehicle systems including ...

2005 Hyundai Tucson Recall - Learn About Recalls for 2005 ...

www.automd.com > Recalls and TSBs > Hyundai Recall > Tucson

Specifically which torque settings are you referring to. There are thousands to choose from. Please give an example such as "differential carrier", "cylinder head", "exhaust manifold to engine block" etc.

No it just bolts on the side of the bellhousing

You didn't say if this vehicle was Automatic Transaxle or Manual Transaxle. No need

here are two photos: One is Manual, the other is Automatic. The manual trans has a separate switch (all by itself), however, the automatic (of both the 4 cylinder and 6 cylinder) use the trans range switch to provide power to the back up lamps







Hope this helps

Ignition Misfire
No other codes?
PO300 doesn't tell you a specific cylinder

its on the right hand side behind the air filter box its an opaque bottle with a black screw top the fluid should be between min/max use DOT3 or 4 to top up

It should be mounted close to the brake master cylinder. It contains brake fluid as well. It should be the same color as the brake master cylinder with a black lid. If you can't find it still, follow the fluid hose from the clutch master cylinder to the reseviour.

dear friend:as this is a very serious job your attempting,i would suggest you get hold of a workshop manual,plse look at the following web sites: BOOKS4CARS.COM and WWW.HMASERVICE.COM