The brake lights do not work. the fuse is good and the taillights do work
There are two filaments inside each bulb for tail lights ,one does running lights and one does stop lights
try replacing bulb it's the least expensive method
SOURCE: 99 Expedition - Brake lights not working
check the brake light switch at the top of the brake pedal and also the fuse link on the battery on the passenager side up near the firewall make sure all of them are clean.
SOURCE: 1984 F-150 Brake Lights and Blinkers
on the brake peddle there is a switch when you press the brake peddle..check to see if after you press the peddle it should activate..it could be stuck or out of place...you may need to get a new one..
the blinker you will have to purchase a blinker relay...ask any part store for it...
SOURCE: Dash lights and taillights out fuses all ok
In battery junction box or the under hood fuse panel check fuse no 11(15amp),it will be at the center of the fuse box where there is 4 fuse slots but looks like only 3 fuses, if this fuse in good then you will see a relay that is shaped kinda like a cross.This is the parklamp relay which also powers the dash lights.
SOURCE: which fuse works the taillights on the 99 ford ranger pickup
check the flasher its under the steering column/please rate my response thank you very much
I think your problem locating the fuse may be because Ford refers to the lights you are describing as "PARK" lamps, instead of "TAIL" lamps. The PARK fuse is Fuse #22 (15 Amp) located in the Smart Junction Box (SJB) in the center of the dash.
HINT: This same fuse also protects the circuits your front park lamps, if they are working, the fuse is not blown.
167 views
Usually answered in minutes!
×