Diagnostic connector location

They are always right next to the crankshaft pulley. Help in the link.

https://www.google.com/search?q=daihatsu+1000cc+ej-ve+crank+sensor+location

..

USA car? In 1991 no 2 cars on earth used the same EFI DLC
you meant DLC< and is OBD1 car in USA> and varies by engine not told., by you,, nor country, coupe or sedan.
no makers (EFI) use the same tools or protocols on that port nor the pins wired the same. ever.
only the Acura tools work or some $5000 tools in huge shops.
that have very expensive plugins to make 50 car makers DLC TaLK
so here goes;.
DLC diagnostic Logic connector location
aka, scan tool port. or service port. (jack/conn)
besides factory scan tools there are those silly now CEL blink codes.
EFI is called PGM here. FI.
service Check Connector -is below the right side of the instrument panel, above the ECU. (usa answer not Europe RHD)
the DLC jumper must be inserted
the blink DTC code are here 91 legend.
what pins to jump IDK sorry, google or real Acura service manual is the goal. 1991 is very old are and few on the road now.(running)

OBD2 connector location in Suzuki Grand Vitara (1997 - 2005)

www.outilsobdfacile.com/...plug-connector-obd/Suzuki-grand-vitara-2
Easily find where your OBD2 port / connector is located in Suzuki Grand Vitara (1997 - 2005) ... OBD connector location for Suzuki Grand Vitara (1997 - 2005).

Suzuki Engines Diagnostic Connectors

codes.rennacs.com/Petrol-Engine/Japanese-Korean/Suzuki-Engines.php
Suzuki Engines - diagnostic connector locations, with detailed diagrams, text, and pictures of where to find the diagnostic connector in the vehicle.

Try under the glove box, whether it is LH or RH drive I believe you will find it above your feet under the glove compartment. Good luck.

You have to have the codes checked and repost. There are probably a 100 different things that will make the light come on

For 1995 Jeep Grand Cherokee 4WD 5.2L MFI 8cyl the OBD Diagnostic Link Connector is located: Under hood, driver side, front side of shock tower, mounted on wheelwell.

Hope helps (remember to rate this asnwer).

There is a diagnostic cable which you will require to do the diagnostic test.
There is no need to physically replace chips, connect extra wires, or adjust hardware. Just connect one end of the cable to your computer's RS232 port and the other end to your daihatsu 14-pin Consult port, which is normally located near the fuse box. 

• Do I need to have my car running while performing diagnostics?
  Most functions require only the ignition to be turned on, not the engine.
• I'm not a professional mechanic, can I still use this cable and software?
  Yes. This cable and software are designed to be user friendly and easy to understand.

And for getting cable .You can get it from Autozone service centers.


Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

According to the National OBD Clearinghouse, it is located on the left side below the dash and is indicated by quadrant #2 on the diagram below..

The diagnostic connector is located on the engine near the starter. However, there are four connectors in that location and without pictures it would be difficult to determine which is the proper one

If you find this Info Helpful Please Rate Me as It Helps me to reach the Expertise STATUS that I have Worked 30yrs to get to LoL Thank You Very Much and Have a Great Week!!



Firing Order: 1 - 2 - 3
Base Ignition Timing
Note: With the T terminal Shorted.5 +/- 2 deg BTDC
Ignition timing should be checked and adjusted, if necessary whenever spark plugs are replaced or any distributor maintenance is done. Ignition timing should be 3-7°BTDC at 750-850 RPM with the engine check connector terminal 11 (brown) shorted, Fig. 1. The engine check connector is located near the top of the transaxle.