Question about 1995 Mercedes-Benz E-Class

2 Answers

W124 M102 ENGINE SWAPPING TO ENGINE M111 ELECTRICAL PROBLEM

I need to get some help. I have a Mercedes Benz 200E with an M102 engine and now has swap the engine for an M111 one. After swapping the engine and changed gearbox from auto to manual and started doing the necessary wirings with the new control box, the engine doesnt want to start as if it doesnt send instructions for firing for the engine to start.... If anyone can help me and send to me any wiring diagram for this engine would be good. Also my electrician tells me that it may be the cause of the flywheel sensor not sending instructions for firing??? Is this true??? Please kinldy elaborate.... Thanks....

Posted by on

  • Roberta Smith
    Roberta Smith May 11, 2010

    don't know about flywheel but there is a cam and crankshaft sensor that need to be working

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you checked the crank position sensor (CPS)?

Posted on Jun 06, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

Fuel pressure can be realese

Posted on Mar 02, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Puttingc camshaft marks of m111 Mercedes benz c180 on position


Shouldent have to there are marks already on them if not tipex does the trick

Jul 02, 2017 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

What is causing my engine to stall at stop light?


Could be a number of things. Start with doing a fuel system clean and air filter swap. If that doesn't fix it. Look into crankshaft position sensor and the knock sensor.

Aug 05, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

1999 Mercedes SLK Kompressor, can not locate the oil plug to change the oil...where is location?


The oil plug is located on the oil pan. If i remember correctly, on the M111 engine, it should be on the driver side at the lowest point on the side. You may have to remove a lower shield or belly pan to see it. They are usually 8mm bolts. I use an oil extractor or evaluator so I don't touch the drain plugs. I hope this helps.

Oct 19, 2013 | 2002 Mercedes-Benz C-Class

1 Answer

How much atf do i need for an auto gearbox on a M102 engine for w123


Hi there:
Check this information about Mercedes Benz W123 (200, 200T, 230E, 230CE, 230TE Class) with M102 engine type...

- Transmission fluid (Shell, Donax or Mobil 220)
- Differential fluid (Mobil HD 80w90)



Service change only - 5.1 quarts. Total refill - 6.4 quarts.



Additionally, keep in ind that the owner's manual is your best friend, check it.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Jun 22, 2012 | Mercedes-Benz 230 Cars & Trucks

1 Answer

My mercedes 1991 300E 2.6 must need the fuel filter replaced What tools are necessary to remove it?


Not sure of what your issue is buy fuel filter is by the fuel pumps under the car rear passenger area under a plastic cover. Some combination wrenches and a good way to stop the flow of gas from both ways and you just swap it out.

May 08, 2010 | 1991 Mercedes-Benz Mercedes Benz Sl Class

2 Answers

Does a 1995 mercedes c220 have a tyming belt?


yes it has a timing belt.and when you fix it there are marks you have to follow or set its the timing mark.

Jul 23, 2009 | 1995 Mercedes-Benz C-Class

1 Answer

Need car manual for 1990 Mercedes-Benz 200E auto


Chilton publishes useful manuals for foreign cars. When I was running Mercedes diesels I relied on them. Haynes makes another useful manual for the MB. Haynes and Chilton can be reached at  Sparkford Near Yovil, Somerset BA22 7JJ England.

Jan 13, 2009 | 1990 Mercedes-Benz 190

1 Answer

1986 200E 124 - Starting problem


check connection to cold start injector and swap it for a know good one i had that trouble and repairing that fixed it

Nov 16, 2008 | 1990 Mercedes-Benz E-Class

Not finding what you are looking for?
1995 Mercedes-Benz E-Class Logo

2,034 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...