Hi my 2004 crown victoria police edition only start when you apply the brake and stay running while you pressing the brake pedal once you depress the brake pedal it shut off instantly. thanks . also it happen after being wrecked.
WELL BUD WITH OUT CHECKING IT OUT ITS HARD TO SAY.I WOULD CHECK THE IGNITION STWICH I THING THAT THE PROBLEM,OR THE START TO FIND IT GOOD LUCK
SOURCE: 2004 Ford Crown Victoria, how many labor hours for?
Depends on whether or not you are going with Brand new or are Going to Machine the Old ones. Which way you goin????
SOURCE: Noise while applying brakes or turn left / right
Sounds like the break rotors are warped. At this point its best to do a break job, chanses are the calipers are the problem not releasing and creating heat, or break lines are not returning fluid back to resavor witch in turn warp the rotors. Run the whole gamet on the breaks. New rotors, New calipers, New pads, and New rubber break lines to calipers. And you will solve your break problem.
SOURCE: emergency brake locked after pull release handle
handbrake jammed on somewhere ,could be front cable ,because the rear cable is pulled by the compensator so if it was the rear one then i would expect only one cable siezed and that is normally the kerbside one.
156 views
Usually answered in minutes!
×