Ford f150 inline 6 4,9 liter

if its look the same then it will work ,dont worry about gear ratios and all the technical stuff so long as the electronic stuff lines up away you go and it dont fit then make it fit

The fuel pump relay is located in the engine bay fuse box. Refer to the owners manual for location or the lid of the fuse box. *(It is near the battery.)

on a inline 6 or a 300 inline there is no left right side o2s. it is the front and back o2s.usal problem is fuel regulator or loss of vavum to it

Check this diagrams...

1998 Ford F 150 4.6 liter V-8 VIN "6"
or
1998 Ford F 150 4.6 liter SOHC V-8 VIN "W"




Remember to rate this; good luck.

Several VIN engine there...

1997 Ford F 150 Pickup 4.6 liter CNG SOHC V-8 VIN "9"
and
1997 Ford F 150 Pickup 4.6 liter V-8 VIN "6"
and
1997 Ford F 150 2WD Pickup 4.6 liter SOHC V-8 VIN "W"




Hope this help to solve it. (remember comment and rated this).

1997 Ford F 150 4WD Pickup 4.6 liter CNG SOHC V-8 VIN "9"





1997 Ford F 150 4WD Pickup 4.2 liter V-6 VIN "2"






1997 Ford F 150 4WD Pickup 5.4 liter SOHC V-8 VIN "L"




Hope this help (remember rated and comment this).

1996 Ford F 150 2WD Pickup
4.9 liter L6


1996 Ford F 150 2WD Pickup
5.0 liter V-8

1996 Ford F 150 2WD Pickup
5.8 liter V-8

Tighten all bolts to 10 Lbs, then 20 Lbs, then 35 Lbs.
That should be fine for the 6 cylinder flywheel.

your truck is a 4.9L, make sure you have power to the front tank fuel pump. is the power to the pump is ok and you can hear the pump run for a second or two when you key the vehicle on... replace the fuel tank selector valve

Unfortunately, You will need to Change it all. None of the V8 Components will Transfer to the Inline 6. Please Rate My Response! Thanks!