2005 jeep liberty air bag and seat belt stays on why

SOURCE: airbag light stays on 2005 jeep liberty

It probably will cost a few bucks to get the code reset, but you don't need to go to the dealership, most shops with a good scanner equipped for air bag code reading will be able to diagnose and reset the light. The most probable reason for the code is the battery being dead for a while, there is a capacitor in the airbag circuit to make sure the airbag can go off in a collision even if the battery disconnects itself in the process. There is a slim chance it might be something else but either way the shop should be able to tell you what the problem is, and get it fixed... But, just for fun, before doing all this, i'd disconnect the battery for 30 minutes to an hour and reconnect it back, some systems do effectively reset themselves this way.

SOURCE: 2004 jeep grand cherokee

Are you using the seatbelts?
The airbag light is on because there is a problem with the system.
PLEASE do not try to fix the airbag problem yourself.
You could accidently activate the bag and get hurt.

SOURCE: 2003 jeep liberty air bag light on is it easy to fix

The system needs to be checked for cades. Airbag codes are pulled out of the ECU with the use of a scanner tool. A good auto mechanic shop will have this or you can go to the dealer. YOU SHOULD NOT TRY TO REPAIR THIS YOURSELF,YOU COULD ACTIVATE THE AIRBAG!!!!!

SOURCE: the cruise control dont work in my 2003 jeep liberty

Same problem here - turned out to be the Vacuum line from the left rear of the engine on the firewall up to the right side of the throttle body ? air intake.
Plugged it back on the hose connector - problem solved.. Works perfect again..

SOURCE: 2005 jeep liberty brake lights will not work. I

brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.