Cars & Trucks Logo

Related Topics:

albert Posted on Nov 06, 2012

2000 jeep cherokee no compression in cylinder 5

5 Related Answers

Anonymous

  • 29 Answers
  • Posted on Sep 28, 2009

SOURCE: 2001 Jeep Cherokee with 6 cylinder engine -- PO306 code cylinder

Plug, plug wire, plugged or open fuel injector. are the most likely.

Ad

Anonymous

  • 6982 Answers
  • Posted on Sep 28, 2009

SOURCE: serpentine belt diagram

Around the outside of power steering pulley,under idler,over a/c comp,around alternator,over fan pulley, around crank pulley, over water pump. The backside of the belt contacts the idler, fan and water pump.

Anonymous

  • 466 Answers
  • Posted on Dec 12, 2009

SOURCE: 1999 jeep cherokee 6 cylinder engine light

P0303 Cylinder 3 mis-fire Possible causes misfire does not return,defective Camshaft Position (cmp)or CKP sensor,vacuum leak,defective ignition system.

Jonah Oneal

  • 14092 Answers
  • Posted on Dec 13, 2009

SOURCE: 96 jeep cherokee misfires on cylinders 5 and 6

do a compression test on cylinder 5 & 6 you could have intake leak.and a leaking head gasket or worn valves in those cylinders.

Anonymous

  • 1 Answer
  • Posted on Apr 13, 2010

SOURCE: Jepp Cherokee 2000 4.0 L 123K miles, cylinder #6

i have a 2000 jeep cherokee and random cylinders are misfireing so i changed the spark plugs and now its just reading that cylinders 4 and 5 are misfireing. it drives fine around town but if i go 70 or a little over on the highway it starts to buck or bogg out i dont want to spend the money on a coil pack without testing it first but i cant find the specs to test it idk what to do????

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I am looking for the timing marks on a jeep 2.7 5 cylinder diesel engine fitted to jeep grand cherokee 2001 model

2001 ,? 2.7L USA jeep???????
my guess it cranks ok.
fuses ok
immobilizer not active, SKIS/SKIM.?
so compression is at spec.
and if it is ,test fuel diesel works?????
Glow plugs work? (we measure current)
then filters
then pump
scan pcm for errors, not all errors glow the silly CEL lamp.
page 1269 in jeep manual, usa, 2000


26288059-3ub3qkuug2p3y0mj4fqyuh53-3-0.jpg
0helpful
1answer

Why dose my 2000 jeep cherokee have a rough idle but seems to run good at freeway crusing speed just bought the vehicle last owner thinks it has a low cylinder compression

My wife's 2004 Jeep Grand Cherokee has had the same problem what I did was take the air intake tube off and cleaned the carbon build up around the air intake valve. I used carbrator spray and a soft cloth to clean this build up off. Make sure to change your air filter and clean out any debris in the air filter box and other air intake tube. If this doesn't help check the Jeep website for information about some electrical module that when it's bad can causes this problem.
1helpful
1answer

Need a wiring diagram for spark plugs for a 1995 jeep Cherokee sport

V6 engine: firing order: 1 2 3 4 5 6, distributor rotates clockwise. Left bank of engine (driver's side), cylinders 2, 4, 6 (#2 at front of engine). Right bank: 1, 3, 5 (#1 at front of engine).
Inline 6 engine: firing order is 1-5-3-6-2-4. Distributor rotates clockwise.
The number one tower on the dist. cap should have a mark or numeral 1 on it. If not, turn crankshaft to top dead center of compression stroke on number one cylinder, the 0 degrees or "T" mark on the crank pulley pointer. If you are on the compression stroke (not the exhaust stroke), the rotor under the dist. cap will be pointing to the number one cylinder spark plug wire tower.
4helpful
1answer

Cylinder number 5 misfire, what is the cause? connected obd II and detected number 5 cylinder misfire?

I'm assuming the code that was pulled is P0305. Best case would be a bad spark plug on the number 5 cylinder. Keep in mind, the spark plugs are torque sensitive when installing. These are the possible causes that are stated in a Jeep service manual for your vehicle. Check the basics first......Camshaft,crankshaft,valve timing or vacuum problem,ignition coil output is low,engine internal mechanical problem,secondary ignition pattern is irregular, fuel contamination, Fuel pressure leak down is out of spec, fuel pump ampere out of spec, fuel pump capacity out of spec, fuel pressure is out of spec., engine compression, PVC system restriction, Fuel injector #5 is defective or the connection on the injector itself is loose or corroded, Intake gasket defective. It could also be freeze frame data in the PCM, but this is a very very rare cause.
0helpful
1answer

My 2000 jeep grand cherokee has straight 6 that i just rebuilt. It does not have a regular distributor, is called a electric pick up? How do I set the timing.I have #1 cylinder set at tdc on the...

The timing is determined by the Power Control Module (computer) by reading the crankshaft position sensor. There is no adjustment possible. The only service possible is replacing individual components.
0helpful
1answer
1helpful
1answer

2000 cherokee,automatic,4.0L. I have a #6 cylinder misfire. What is usualy the cause?

CHECK IGNITION COIL IF IT HAS COIL PACKS, SPARK PLUG WIRE, INJECTOR, IF ALL CHECK GOOD, CHECK CYLINDER COMPRESSION.
0helpful
1answer

What is the firing order of a 2005 jeep grand cherokee

I wrote all engine spec for a 2005 jeep grand cherokee

3.7L 6 cylinder
1-6-5-4-3-2

4.7L 8 Cylinder
1-8-4-3-6-5-7-2

5.7L 8 Cylinder
1-8-4-3-6-5-7-2

let me know if this help you.....
0helpful
2answers

Jepp Cherokee 2000 4.0 L 123K miles, cylinder #6

try changing your crank senor. Get part from the dealer... My jeep was misfiring and changed OEM part and jeep rides good.
Not finding what you are looking for?

89 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...