Nobody makes a cold air intake for a saturn ion. this one was made for a cobalt, both have a 2.2. ecotec motor
The P0102 means Mass or Volume Air Flow Circuit Low Input
The P0101 means Mass or Volume Air Flow Circuit Range/Performance Problem
The P0300 means Random/Multiple Cylinder Misfire Detected
The P0171 means System too Lean (Bank 1)
_________________
Ktag ecu programmer
U put a cold air on my 2005 saturn ion 3. and i got codes saying my bank 1 was lean so i replaced the o2 sensor and now my car idles funny one and a while. im going to reset the car by unplugging the battery but how do i clear a code. i dont remember the code numbers i got but it said bad MAF which i had tested and cleaned with proper spray and or i have random missfires which i never had before with the factory box. And i had it tell me my fuel injectors could be bad but i replaced those like 10k ago. anyone know whats wrong or how to fix it?
SOURCE: Can you teel me what
Code P0171
Fuel Trim System Lean Bank 1
Issues that may be causing this error code; fuel filter, vacuum leak, low fuel pressure, fuel pressure regulator. The easiest to do is replacing the fuel filter if it was never replaced. The next would be having a fuel pressure gauge to check pressure on the fuel rail's test valve; somwehere around 50-60psi after the ignition is turned ON. The pressure test can only tell you if the pressure regulator is maintaining pressure required for the fuel injection system. It will not tell you if flow is restricted while the engine is running, that can be attributed to a strangled fuel filter.
P0174
System Too Lean Bank 2
Issues that may be causing this error code; fuel filter, vacuum leak, low fuel pressure, fuel pressure regulator. The easiest to do is replacing the fuel filter if it was never replaced. The next would be having a fuel pressure gauge to check pressure on the fuel rail's test valve; somwehere around 50-60psi after the ignition is turned ON. The pressure test can only tell you if the pressure regulator is maintaining pressure required for the fuel injection system. It will not tell you if flow is restricted while the engine is running, that can be attributed to a strangled fuel filter.
P0300
suspect the spark plugs/ ignition wires.
Good Luck please accept the answer
872 views
Usually answered in minutes!
these codes came up after i put on the aftermarket cold air intake. the codes did not come up when i had the factory airbox on. i know what the codes mean. i need to know how to get rid of them.
×