I need the correct size of the Starter Bolts on my 1993 Dodge Dakota.. It has 3.9, V-6 Magnum engine. One bolt has fallen out and the other is loose. Does anyone know what Metric size is required? I was told that I could purchase the bolts at Auto Zone... All replies will be appreciated!
You can buy them at autozone,they may even know what size you need. usually starter bolts are the same size and in some cases just the length is different. simply try the one you have in the other hole and if it works then problem solved on the size but the length may still be different.
SOURCE: stripped bolts on dakota
Go to this web site these Helicoil thread repair kits will work for your application, these Helicoil kits are the only way to repair threads that really work, These kits are available from premium auto parts stores like NAPA and CAR QUEST
http://www.cartools.com/Helicoil_Thread_Repair.htm Hope this helps, you can call if you like to clarify what you need further, Phone 925-577-7157, ask for Dennis
SOURCE: 1997 dodge Intrepid: inner tie rod
how do you change the tie rods on a 1997 dodge intrepid 3.3 liter?
SOURCE: threads stripped.
It is an odd size, I believe 9mm thread and Heli-coil makes a kit just for this job. I know because I have the kit at work! Try another Autozone or ask to speak to the manager and have him look it up, it does exist for sure. This is actually a pretty common problem. If you're still stuck tomorrow and I will dig up the part number and post it.
SOURCE: what size caliper bolt for front brake assembly on
The retainer bolts in a Durango 2000 are 7 MM hexagonal heads,otherwise known as 7 MM Allen wrench.
1,261 views
Usually answered in minutes!
×