Fuse box diagram hyundai sonata 2001

SOURCE: replacing rear wheel bearings on 1999 hyundai sonata

1. for drum brakes with sealed hub(all one piece) remove lug nuts and wheel.
2. spray penetrating oil around studs if there is a big phillips head screw visible remove it with impact driver/if not use big ballpeen hammer ,tap on flat of drum near studs(becareful not to hit them) until drum loosens(your creating a shockwave to loosen rust)
3. once drum is off there are 4-bolts coming in from behind backing plate, remove them then hub should be able to be removed w/a little persuation from hammer.

1. remove wheel
2. remove dust cap,cotterpin,star washer(if equipped) do not re use cotter pin
3. remove nut then washer, wiggle brake drum and front bearing will come out.
4. put nut on shaft tighten 2-3 turns grab drum by sides and pull towards you this should remove drum leaving inner bearing/seal on shaft
5. to replace reverse procedure making sure to pack new bearings w/grease(take drum and use long punch to remove bearing races, use race/seal installer to install new races

1. remove wheel
2. remove caliper/bracket
3. remove rotor
4. remove 4-bolts from behind,tap old hub out
5. reverse procedure

SOURCE: 2001 Hyundai XG300 Fuse Diagram

Here is the fuse arrangement...you can see there are usually some spares if they are there.




This should answer your question.
If it helps please rate my answers.
You can do it.
Brett

SOURCE: fuse box diagram

Go to http://www.hmaservice.com/ and register. All you ever wanted to know - shop manuals, wiring diagrams, fuse box details, etc.

SOURCE: My 2006 Hyundai Sonata's brake lights are not working

try the brakelight switch, it is right near the pedal above the footpad

PAUL MC G

• 1280 Answers
• Posted on Sep 07, 2009

SOURCE: installing timing belt in 2001 hyundai sonata 6

This should help.