No pwer to window switches
You power window is controled by the door control module,The power window remains functional for 10 minutes after the ignition is switched off,provided that the door is not opened,
Maybe everyone is as befuddled as me! What kind of system lowers a window with a door key? This is a new one on me.
Usually, power windows have a circuit breaker, rather than a fuse in the circuit.
If you pull off the master switch on the driver's door, on the connector there, you should have one hot wire to the switch with key on in the ignition. You say no power to switches:is that because the switches don't work, or have you verified no power on any wire to the masterswitch?
If you do have a hot wire at the masterswitch, then likely you have a bad masterswitch, or the ground for the power windows may be loose, but that doesn't seem likely if you got the window to roll down with the key. If you don't have a hot wire to the masterswitch with key on, then you need to check the wiring going into the door. Maybe a wire got broke there.
Good luck.
SOURCE: power windows quit working
you sound like you have a bad connection to the new switch. Clean the contact on the wire connection to the switch. Also get a jumper wire to see if you can jump it out with the new switch pulled off???
SOURCE: power windows quick working with switch
The power for door lock servos and windows is on the same run of cable in wiring harness in door, with two very similar plugs that connect to the window switch and to the door switch. My guess is ou have probably connected the power window plug to the door and vice versa. You will notice one plug has 4 pins and the other has 5 (from memory) - make sure you match these up.
SOURCE: 2006 New Beetle Convertible Power window opens
needs resetting on the two clamps that hold it in place on the winder mechanism ,not difficult to do ,just take the door panel offf
439 views
Usually answered in minutes!
is there a different fuse fore window switches
why does the key work in dorr to lower window and switches have no power to them
why did i sign in to fix ya and nobody has a comment
why did i sign in to fix ya and nobody has a comment
×