Valve seetings for a 2010 mitsubishi triton - 4D56

Whether direct or indirect injection, a diesel engine is invariably an interference engine - the very high compression ratio of a diesel means the piston rises very close to the cylinder head and valves. The correct valve timing is essential.

are you asking for the specs for valve adjustment

try this link , click on torque table's and look up your vehicle
http://www.speedwayautoparts.com/index35.htm

try this link click on torque tables and look up your vehicle
http://www.speedwayautoparts.com/index35.htm

http://www.mitsubishi-motors.kiev.ua/Manuals/Engine/pwee9067/11B.pdf this will give the valve clearance as well

you have to go on line internet type in 4d56 mitsubishi turbo diesel cylinder head should find one.

You can get them at E-Bay.

BUY A ALTERNATOR THAT MEANS THE ALTERNATOR IS GOING BAD AND EVERYTHINGS RUN OFF THE THE ALTERNATOR

i think you are reffering to a 4D56 engine. just type 4D56 workshop manual .pdf download on your browser and you fill find several free downloads. everything you need to overhaul the engine is there

o.25mm when hot this is for inlet and outlet