Engrine/door keys i lost my keys for a ford crown victoria 1997 with the vin number 2falp71w5vx1900090 and i want to know how can i get a copy

Use vinegar to unfreeze

Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

i think there is a small sticker on the arm of the trunk that has the number code. or check the drivers door modeul it will be 5 didgets

You sould be able to take your VIN number to the deal for a new key.

Locksmith can open it or you can take the VIN number and proof of ownership to the dealer and they will cut you a new key.

2004 Ford Crown Victoria 4.6 liter V-8 VIN "W"



Hope helps (remember rated this).

not to sound crazy ! do u own this car out rite! if so you can go to the dealer with the reg and they can cut u a key through the vin number! the key will cost 30 to 45 dollars ! its cheaper than a locksmith

Before you do any drilling get your vehicle identification number and call the dealership and they might be able to cut you a key.You will probably have to give them some identification to show that you own the vehicle.This would be a lot easier than drilling the lock cylinder out.Hope this helps.Good luck.

Separate mudula all together, your car may or may not be set up with the wiring ( factory wiring ) to install the system. Have your local Ford dealer run the VIN # to check.

no more then 10 to 15 bolts they are under the hood remove the inner fender and you will see the rest and there should be one or two under the car near the doors