Open the Raider's hood. The AIT is always going to be on the intake manifold, near the air filter box.
The AIT sensor is located inside the large black plastic box on top of the engine. There is a 2-wire plug connector that plugs into the driver side of this box that connects the sensor wires. Mods simply remove the plug and attach the new AIT diode to the plug without plugging it back into the black box. Note: Your check engine light will stay on and not much improvement (if any) to performance. I took mine back out and restored back to stock. Don't waste your money on gadgets for the AIT.
479 views
Usually answered in minutes!
×