Televison & Video - Recent Questions, Troubleshooting & Support
Senzu remote control said scan all brand Senzu LD 2400 tv
Please call Senzu and ask them to email you the remote control manual. If you don't have their number, you can reach Soniq (related company) by calling this number: 1300 765 663. Otherwise, please reach out to sellers who sell that brand of product and ask them to connect you to Senzu.
Can bad T-Con board cause Samsung TV to flicker off and on?
I think an LED problem is more likely. The LED strips are usually powered by a driver circuit on the power supply board. You can check this with a bright flashlight shining on the front of the display at about a 20° angle from parallel to the display. If you can see the picture or the menu with the flashlight beam during the "dark" period, the problem is NOT likely to be the T-Con board.
You can also look at the back of the set with the cover removed - most sets have a number of vent holes in the back plate through which the backlight can be seen when it is on. If these holes go dark when the TV goes black, the backlight is being turned off.
When the screen is lit, take a picture quickly and look for dark spots. Maybe one of the LEDs has a partial short that shuts down the LED power and triggers a retry cycle. If so, after a while it will burn out and then the entire LED strip will be inoperative.
11/29/2022 12:02:25 AM •
2 hours ago
How do I diagnose which board I need for 4k TV that powers on but the screen is black?
With the TV turned on, press the menu button and shine a bright flashlight on the screen at a shallow angle (about 20° from parallel to the screen). Move it around - if you can see the menu or other material where the flashlight is pointing, you have a backlight failure. This may be either in the power supply, or the backlight itself (sadly, with LED backlights, it's usually a blown LED).
Trying to find dice for 4-way spelldown.
I was able to determine the letters on each die from photos. Die 1 = A(white), O (w), U (w), E(red), A(r), I(r)
Die 2= S(w), D(w), T(w), N(r),M(r),R(r). I have the vowel die.
Backlight spots on tv screen
When you took the light defusing screens out there was 3 screens that you removed, they need to go back in the say way they came out, you mixed them up and now the set isn't distributing the light correctly, pull the panel out again and put them back in the same way you removed them and it will work like it should, simple fix.
11/28/2022 11:47:49 AM •
14 hours ago
My Magnavox bluray disc player NB500MG9 will not
My Blu-Ray will not play x disc
A Blu-ray player can play DVD or CD and still not play Blu-ray. It may play Blu-ray but not CD or DVD, or burned discs. This is all caused by the 'optical' a part that reads the disc in the machine. Your player will need service as a Blu-ray optic cannot just be 'dropped' into a player.
11/28/2022 3:50:08 AM •
22 hours ago
Why my TV is switching off by itself PHILIPS?
It could be a lot of things causing the issue, without electronic knowledge it's going to be hard to diagnose, also a 10 plus year old set isn't worth fixing, parts will run more than the set is worth, time for a new set.
11/28/2022 3:43:55 AM •
22 hours ago
Not finding what you are looking for?