Hardworking fellow, but likes to enjoy life also!
Mark Eaton posted an answer for this 2000 Harley Davidson FXDWG Dyna Wide Glide:
"Manipulate your harnesses (that is, squeeze, pull, and twist...but gently) while someone..."
Mark Eaton posted an answer for this Harley Davidson Motorcycles:
"It is possible. The draw on HD batteries is strong for their size, and connections must..."
Mark Eaton posted an answer for this 2003 Suzuki RM 250:
"how do u tell when there is enough oil in the crank case of a 2003 suzuki rm 250 ... there..."
Mark Eaton posted an answer for this 2003 Suzuki RM 250:
"On the left side just in front of the sprocket is an Allen head bolt- this is your oil..."
Mark Eaton posted an answer for this 1997 kawasaki VN 800 A Vulcan:
"If you try to adjust the monoshock spring, and this does not improve, then you must..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Elimination of the PAIR valve and its hardware also makes valve adjustment much..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"If you are referring to the axle nut, it is 45-65 ft. lbs."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Remove the screw on the bottom of the chrome plastic cover under the headlight, then pop..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"There is no filter, but a screen over the fule pump intake in the tank. You could..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Pull the rear wheel, the fake swingarm on the left side, and the small plastic cover on..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"This has been discussed in the Vol/C50 forums for some time now; Suzuki maintains that..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"I changed the battery and now the signal lights don't blink?"
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Make sure that you did not disturb the harness connector for the rear fender lighting; it..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"once I've adjusted my rear cylinder valves the valves on the front cylinder are very loose..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"I will refer you to the Volusia Riders forum archive, one of the best and concise ones..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"You willl have to loosen the nuts that retain the tail light assembly to the fender, then..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"It is not all that unusual for new engines to consume a slight bit more oil during the..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"My bike only has 400 miles and is already a little low on oil. Is this normal?"
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"When correctly set, the valves can be quite loud on startup on these bikes, sometimes..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"I have a c50 2005 it seems to have a very disturbing noise in the engine..I have had the..."
Mark Eaton posted an answer for this 1999 kawasaki VN 800 A Vulcan:
"I have a 1999 vulcon 800 classic everytime i hit a bump in the road the engine dies bike..."
Mark Eaton posted an answer for this 1999 kawasaki VN 800 A Vulcan:
"Check the kickstand saffety switch to see if it is shorting out when you hit bumps."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"1) Can not find this spec. 2) C50 rake is 33 degrees, Fat Boy's is 32. 3) Many have had..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"1) Fork height of C50 vs Harley fat boy 2) Fork angle of C50 vs Harley fat boy 3) When..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"2007 year model"
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Remove the handlebar counterweights. Fashion an L-shaped tool from a metal coat hanger,..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"If the bracket is not yet in place, you will need to remove the plastic cover up front..."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"It is a c50 and its an OEM windshield. I have NO instructions at all."
Mark Eaton posted an answer for this 2005 Suzuki Boulevard C50:
"Volusias (2004 and earlier): you will have to remove the "fake" frame section from the..."