wood butcher posted an answer for this Uniden Radio Communications:
"cbtricks .com"
wood butcher posted an answer for this Radio Communications:
"are you sure it is a cb radio and not a ham radio"
wood butcher posted an answer for this Radio Communications:
"check on cbtricks.com"
wood butcher posted an answer for this Kenmore Refrigerators:
"the pump on the back of refr might be shot.if there is no water in the ice tray look on..."
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"three things you need to check the mic must be plug into radio, make sure that the radio..."
wood butcher posted an answer for this Cobra Radio Communications:
"on the phone after you have pair make sure that you phone is not still on pairing mode ."
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"make sure that it is a cb radio and not a business band radio"
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"wiring a turner roadking76 to a cobra 29ltd"
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"1-shield/red 2-white 3-blue 4-black yellow N/C"
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"location of the antenna is every thing.the other thing to check is you swr.If your swr is..."
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"my cb will transmit ok but my reception range is not very far and I have a K40 trucker..."
wood butcher posted an answer for this Galaxy Radios DX-2517 CB Radio:
"I need to know what frequency I'm on from one band to the nnext for instance channel 12 am..."
wood butcher posted an answer for this Galaxy Radios DX-2517 CB Radio:
"on the cb band (11 meters ) 27.105 is channel 12"
wood butcher posted an answer for this Connex Radio Communications:
"I need the schematics to a Connex 3300 hp. I'm tired of all the shops doing me wrong. It's..."
wood butcher posted an answer for this Connex Radio Communications:
"go to cb tricks.com. I just looked there it did not have the schematic for that radio.You..."
wood butcher posted an answer for this Uniden Radio Communications:
"How do i wire a galaxy echo mic to my president dwight d radio,,the mic works on my other..."
wood butcher posted an answer for this Uniden Radio Communications:
"1=shield 2=yellow 3=red 4=black"
wood butcher posted an answer for this Radio Shack TRC-447 CB Radio:
"how do I wirer a d104 to a radio shack trc-446 and what is the color for each number. you..."
wood butcher posted an answer for this Radio Shack TRC-447 CB Radio:
"1= Audio=white 2=rx=black 3=tx=red 4=nc 5=shield=shield 6=nc"
wood butcher posted an answer for this Uniden BCD396T 6000-Channels Handheld CB Radio:
"were do i find scanner codes?"
wood butcher posted an answer for this Uniden BCD396T 6000-Channels Handheld CB Radio:
"you can go to radio reference.com or cityfreq.com"
wood butcher posted an answer for this Cobra 19 DX IV CB Radio:
"Check the in line fuse to make sure it is not blown. I would also check the cb pa switch"
wood butcher posted an answer for this Cobra 19 DX IV CB Radio:
"when i turn on the cb it does not light up and no one can hear me."
wood butcher posted a question about Cobra 25 LTD 40-Channels Base CB Radio:
"cobra 25 LTD classic no transmit or receive.I have checked the mic and finals and they..."
wood butcher posted an answer for this Cobra HG-M75 Microphone:
"Pin-1-Shield-Ground 2-Yellow-Audio 3-Red-TX 4-Black-RX notes:The..."
wood butcher posted an answer for this Cobra HG-M75 Microphone:
"PIN 1-shield-Ground 2-Yellow-Audio 3-Red-TX 4-Black-RX I hope that..."
wood butcher posted an answer for this Galaxy Radios DX-959 40-Channels Base CB Radio:
"make sur that the radio is on cb and not pa"
wood butcher posted an answer for this Uniden Radio Communications:
"1-White 2-Shield/Blue"
wood butcher posted an answer for this Astatic Radio Communications:
"wiring for TUG-8 stand(4 wire mike) 1-White 2-Shield 3-Red 4-N/C 5-N/C black-N/C TUG-9 ..."
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"I hope this will help you on setting your swr put the radio on channel 1 check your swr...."
wood butcher posted an answer for this Cobra 29 LTD CB Radio:
"make shure that the rf gain on the front of the radio is turned up. if you have another..."