i will stay on the project until it is solve
Anonymous posted an answer for this Canon CLC 1180 Copier:
"your back up data is currupt, you need to change your p-sens-p value check your door spect..."
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"there are several steps before reaching the laser i-- clear dc con then take machine off..."
Anonymous posted an answer for this Canon imageRUNNER 5000 Copier:
"you need to remove the drum and reseat it"
Anonymous posted an answer for this Canon CLC 5000 Copier:
"clean or replace your pattern reader also turn image off in service mode this is only a..."
Anonymous posted an answer for this Canon NP 6050 Copier:
"the gear is damage"
Anonymous posted an answer for this Canon CLC 5000 Copier:
"only the lower one YOU MUST HAVETHE UPPER ONE IN THE MACHINE THERE IS A SENSOR THAT TELL..."
Anonymous posted an answer for this Canon CLC 1120 Color Copier:
"go into service mode -function-clear-error- take machine off -un plug from wall..."
Anonymous posted an answer for this Canon CLC 1150 Color Copier:
"you will be unable to make copies but should be able to continue to print from your..."
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"you need to load the copier drivers into your server you can down load these drivers from..."
Anonymous posted an answer for this Canon CLC-700 Copier:
"thes machine are very old and outdated and will not function with up dated software but do..."
Anonymous posted an answer for this Canon CLC-700 Copier:
"no this is avery very old machine and will not have any software from canon . the printer..."
Anonymous posted an answer for this Canon CLC 1120 Color Copier:
"clean your toner sensors take machine off then on doa develpoper stir int then do a..."
Anonymous posted an answer for this Canon CLC 4000 Copier:
"clean your waste toner pipe by using a vaccum you also haveto hit it to break up any hard..."
Anonymous posted an answer for this Canon CLC 1140 Copier:
"change your transfer cleaning assy."
Anonymous posted an answer for this Canon CLC 1150 Color Copier:
"change the lcd panel this one is going bad"
Anonymous posted an answer for this Canon CLC 1180 Copier:
"go into service mode function or adjust and put in all the door spects take machine off..."
Anonymous posted an answer for this Canon CLC 1000 Color Copier:
"the connection between eco-id pcb and reader controller is faulty, canon do not make..."
Anonymous posted an answer for this Canon CLC 1000 Color Copier:
"your transfer bed and sheet change the transfer sheet also clean the whole bed"
Anonymous posted an answer for this Canon CLC 1000 Color Copier:
"change all your developers"
Anonymous posted an answer for this Canon CLC 2400 Color Copier:
"change your regrestration rooler ie the big black rooler +the belt that is on the rooler..."
Anonymous posted an answer for this Canon CLC 1150 Color Copier:
"your lcd screen is damage replace it"
Anonymous posted an answer for this Canon imageRUNNER C3220 Color Copier:
"your fixing assy. is bad replace it"
Anonymous posted an answer for this Canon imageRUNNER C3220 Color Copier:
"go into service mode second level and adjust your colors"
Anonymous posted an answer for this Canon CLC 1000 Color Copier:
"this is a very old machine and canon do not make certain parts any more------01= yellow..."
Anonymous posted an answer for this Canon imageRUNNER 2200:
"re install the system software , flash the machine, or clear mmi"
Anonymous posted an answer for this Canon CLC 1110 Copier:
"can you explain further ,"
Anonymous posted an answer for this Canon CLC 1150 Color Copier:
"asfter clearing the error code turn the machine off then on again, if that dosen work..."
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"check your wall outlet rthe voltage is less than 110"
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"one touch address book"
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"first is the paper deck activate in service mode if not activate it, your feed , pickup..."
Anonymous posted an answer for this Canon imageRUNNER C3200 Copier:
"you have miss regrestion there are several ways to correct this process 1-go into service..."