Anonymous posted an answer for this Singer 1748:
"It sounds like the shuttle and needle timing needs re-setting. Contact a mechanic."
Anonymous posted an answer for this Singer Sewing Machines:
"Make sure that there is tension on the thread when you have passed it through the tension..."
Anonymous posted an answer for this Singer Sewing Machines:
"The shuttle and needle timing needs to be re-set. Also the hook needs to be inspected for..."
Anonymous posted an answer for this Sewing Machines:
"You have knocked the machine out of timing, the shuttle and needle timing needs to be..."
Anonymous posted an answer for this Sewing Machines:
"You can use a continental converter this has the normal 3 pin plug with a two pin..."
Anonymous posted an answer for this Janome Memory Craft 9000 Computerized Sewing Machine:
"The critical thing is the needle length and to make sure that the needle is pushed right..."
Anonymous posted an answer for this Sewing Machines:
"This is a timing problem the hook timing needs adjustment, and possible the needle timing..."
Anonymous posted an answer for this Brother CS6000i Computerized Sewing Machine:
"DO NOT OIL especially near the computer (in the base) Oiling should only take place after..."
Anonymous posted an answer for this Singer 3116 Simple:
"If your tension is wrong on the bottom it is the top tension that is incorrect. Check the..."
Anonymous posted an answer for this Janome MyLock 634D Mechanical Sewing Machine:
"Telephone Hobkirks Sewing Machines 120-128 Darwen Street Blackburn BB2 2AJ 01254-693555"
Anonymous posted an answer for this Brother XL-5700 Mechanical Sewing Machine:
"If the bottom thread is loose, it is the top tension that is at fault. Check the tension..."
Anonymous posted an answer for this Brother LS-1217 Mechanical Sewing Machine:
"Are you sure that the feed dogs have not been dropped to enable embroidery, and not..."
Anonymous posted an answer for this Singer Sewing Machines:
"The stitch lenght lever is probably siezed, remove the cover to reveal, and carefully oil..."
Anonymous posted an answer for this Bernina Sewing Machines:
"DO NOT LUBRICATE THE MOTOR!! The machine needs to split, ie the outer casing needs to be..."
Anonymous posted an answer for this White Sewing Sewing Machines:
"It sounds like a timing problem - the shuttle timing and possibly the needle timing needs..."
Anonymous posted an answer for this Brother XL-2230 Mechanical Sewing Machine:
"This sounds like it needs lubrication, especially on the top shaft bearing. These machines..."
Anonymous posted an answer for this Singer Quantum XL-1000 Computerized Sewing Machine:
"Your shuttle timing is out, this will need a qualified mechanic to fix it, it is to..."
Anonymous posted an answer for this White Sewing Sewing Machines:
"make sure you have threaded it correctly, always thread with the presser foot lever down,..."
Anonymous posted an answer for this Brother XL-6562 Mechanical Sewing Machine:
"get a pair of pliers, and GENTLY pul the needle down and rock from side to side."
Anonymous posted an answer for this Janome Memory Craft 3000:
"Check the needle plate gap where the thread comes up from the Spool and the needle goes..."