Anonymous posted an answer for this Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140:
"I couldn't find a Makita DC18SC manual for you, but here is a DC18SC Makita breakdown for..."
Anonymous posted an answer for this Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140:
"First, check the lever on the top of the drill (high/ low lever speed) and make sure it is..."
Anonymous posted an answer for this Makita HP1500- Factory-Reconditioned 5 Amp 9/16" Hammer Drill:
"I have a wiring diagram that I could email you. I took it out of my Makita book and just..."
Anonymous posted an answer for this Bosch 1581AVSK Top Handle Jig Saw Kit:
"You can also try www.toolsandmachinery.com."
Anonymous posted an answer for this Bosch Saws:
"It sounds like you need to replace the shaft."
Anonymous posted an answer for this Bosch Plunge Router:
"You can try to adjust the lever that moves the plunge and see if that helps, but a plunge..."
Anonymous posted an answer for this Dewalt DW788 Heavy Duty 20" Variable Speed Scroll Saw: DW7881 Worklight:
"If you are getting voltage then it is most likely the control board. You would need to..."
Anonymous posted an answer for this Dewalt Heavy Duty Xrp 1/2" 18V Cordless Hammerdrill/Drill/Driver Kit DC925KA:
"Open up the old chuck all the way and there is a screw down in the middle of the chuck,..."
Anonymous posted an answer for this Dewalt DC910KL Heavy-Duty 1/2" 28V Nano Phosphate Lithium Ion Cordless Hammerdrill/Drill/Driver:
"It could be the drill, battery, or charger. If you have a voltage meter you can check for..."
Anonymous posted an answer for this Dewalt Drills:
"You may have put it back together wrong, but you may also need a new transmission. 99% of..."