2
Anonymous posted an answer for this LG LSC26905TT Side by Side Refrigerator:
"it sounds like the main control pcb is bad. it is not letting the defrost cycle work..."
Anonymous
Anonymous posted an answer for this Mitsubishi WD-65732 65" Projection HDTV:
"the lamp thermister has bad connections at it plug. this is a common problem with this..."
Anonymous
Anonymous posted an answer for this Mitsubishi WD-62525 62" Rear Projection HDTV:
"the lamp is behind the speaker cover, behind a little door in the front of the set. it is..."
Anonymous
Anonymous posted an answer for this Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television:
"the chassis needs to be rebuilt. go to www. tv-techs.com for more info"
AnonymousAnonymous posted an answer for this Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television:
"there is no convergence on this set. you have a problem on the FMT and the DM pcb's.the..."
Anonymous
Anonymous posted an answer for this Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV:
"no, it is not the lamp,the DIC 2 board is bad.in this case it is best to have a sony..."
AnonymousAnonymous posted an answer for this Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV:
"6 blinks is a b+ ovp usually on the 17vdc source. the g1 board will need to be repaired or..."
Anonymous
Anonymous posted an answer for this Samsung HLN437W 43" Rear Projection HDTV:
"did you change the color wheel because it was noisy? the most common mistake with the..."
Anonymous
Anonymous posted an answer for this Mitsubishi WS-55613 55" Rear Projection HDTV:
"check out www.blinking-green-light-of-death.com"
Anonymous
Anonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"on this set you have a good chance with the 4 caps on the dm board. go to..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"the DM board and the FMT board need to be repaired. it is not the 4 caps. it will cost..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"i have thought about this since you first posted it. if the demo is good then the light..."
Anonymous
Anonymous posted an answer for this Sony KV-36XBR400 36" TV:
"5 blinks is an IK balance problem. it means your picture tube is not drawing the correct..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-62525 62" Rear Projection HDTV:
"I doubt that it is the optical assy. it sounds more like a chassis problem either on the..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"it is not the lamp. the DM board is causing this problem. if the DM is going bad the FMT..."
Anonymous
Anonymous posted an answer for this LG RU-42PX10 42 in. HD-Ready Plasma Television:
"either the address board or the panel has gone bad. the problem is that many times the..."
Anonymous
Anonymous posted an answer for this Televison & Video:
"it is a glycerin based fluid. most good electronic supply houses have it...."
AnonymousAnonymous posted an answer for this Televison & Video:
"since you changed the ballast and the power supply the first thing i would do is recheck..."
Anonymous
Anonymous posted an answer for this Mitsubishi WD-62825 62" Rear Projection HDTV:
"the chassis needs to be rebuilt it will cost about $250.00 go to www.tv-techs.com"
Anonymous
Anonymous posted an answer for this Mitsubishi WD-52725 52". Rear Projection HDTV:
"the DM board is going bad and needs to be rebuilt. check out www.tv-techs.com"
AnonymousAnonymous posted an answer for this Mitsubishi WD-52725 52". Rear Projection HDTV:
"all 47uf, all 220 uf, all 100uf, probably most if not all of the 10uf, and 4.7 uf. it is a..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52725 52". Rear Projection HDTV:
"it is a surface mount fuse in the upper right quarter of the power supply. the only times..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52725 52". Rear Projection HDTV:
"it is not a common problem with this set. are you able to tell the pattern of the blinks.?..."
Anonymous
Anonymous posted an answer for this Mitsubishi WD62628 62" Projection HDTV:
"first try resetting and rebooting. reset = menu, 2470, enter. reset is press reset button..."
AnonymousAnonymous posted an answer for this Mitsubishi WD62628 62" Projection HDTV:
"usinng the av cable (1 yellow, 1 red, 1 white), on the back of the set plug them into..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"it sounds like possibly the 3300uf caps on the power supply. take a look at them and see..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"the DM board is defective. there are approx 20 smd parts that need to be changed. if this..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"go to www.blinking-green-light-of-death.com it shows available."
AnonymousAnonymous posted an answer for this Televison & Video:
"it depends on how old the set is. some of the older sets would only go as hi as channel..."
AnonymousAnonymous posted an answer for this Mitsubishi WD-62525 62" Rear Projection HDTV:
"it sounds like the bglod (blinking green light of death). this chassis is a rough one to..."
AnonymousAnonymous posted an answer for this Televison & Video:
"if there is no breakage you are one lucky person. you can look to see if the cable from..."
Anonymous
Televison & Video 176 answers
Refrigerators 1 answer
