3If I don`t have the answer I will try and find it
Anonymous posted an answer for this Hilti Hammer Drill, 8.4 Lb 3 Mode, Te 16 C:
"you can call Hilti direct at 1-800-879-8000 and they should be able to help you. Let me..."
Anonymous
Anonymous posted an answer for this Dewalt Bosch 11255vsr 1" Sds Plus Rotary Hammer Drill:
"if its like the ones I worked on you need to pull the brushes up into the tube and you..."
Anonymous
Anonymous posted an answer for this Milwaukee 6180-20 14" Chop Saw Abrasive Cut-off Machine:
"I answered this on your other posting."
Anonymous
Anonymous posted an answer for this Makita Saws:
"you need to depress it fully to disengage the lock. If the head does not depress enough..."
AnonymousAnonymous posted an answer for this Milwaukee 6180-20 14" Chop Saw Abrasive Cut-off Machine:
"UNPLUG tool first, there is a spindle lock near the upper guard/gearcase that needs to be..."
Anonymous
Anonymous posted an answer for this Metabo 600626761 Na 1/2" 0 550 Rpm 6.0 Amp Rt. Angle:
"you can try going to ereplacementparts.com and typing in your model number buy a switch..."
AnonymousAnonymous posted an answer for this Metabo 600626761 Na 1/2" 0 550 Rpm 6.0 Amp Rt. Angle:
"you can try going to ereplacementparts.com and typing in your model number buy a switch..."
Anonymous
Anonymous posted an answer for this Makita Drills:
"sounds like you have a battery problem and I would think that it has also damaged the..."
AnonymousAnonymous posted an answer for this Makita Drills:
"sounds like you have a battery problem and I would think that it has also damaged the..."
AnonymousAnonymous posted an answer for this Makita Drills:
"you can try going to either makitausa.com or ereplacementparts.com for a parts..."
AnonymousAnonymous posted an answer for this Saws:
"using a volt/ohms meter go between the field leads and then reverse them to see if there..."
AnonymousAnonymous posted an answer for this Bosch Saws:
"unless the trigger lock is depressed it is NOT normal and potentially dangerous if you..."
Anonymous
Anonymous posted an answer for this Makita 10" Dual Bevel Sliding Compound Miter Saw:
"there are 2 black screw caps on the outside of the tool that need to be removed. USE a..."
Anonymous
Anonymous posted an answer for this Stanley Ring Kit for Bostitch N64C 1 Coil Siding Nailer:
"depends on where air is escaping from. If it is around the trigger then you need a new..."
Anonymous
Anonymous posted an answer for this Hilti Tools & Hardware - Others:
"you can try their site at hilti.com or call them direct at 1-800-879-8000 for this..."
AnonymousAnonymous posted an answer for this Dewalt Drills:
"you need to service this tool. The grease has apparently broke down and would need to be..."
AnonymousAnonymous posted an answer for this Drills:
"you can try going directly to Hilti at their site at Hilti.com and find a service/parts..."
AnonymousAnonymous posted an answer for this Milwaukee Tool Drills:
"If you mean the cord you can find the part number by going to milwaukeetool.com and you..."
AnonymousAnonymous posted an answer for this Drills:
"was this drill press recently rewired or had a switch installed. The only thing I can..."
Anonymous
Anonymous posted an answer for this Stanley Bostitch Nail Gun:
"depends on where the air is leaking from, if the top of cap you have a pinched o ring,..."
AnonymousAnonymous posted an answer for this Grinders:
"I am thinking that you have the wrong site to track the order. This is a technical support..."
Anonymous
Anonymous posted an answer for this RTO PasLode 900420 Impulse Framing Nailer :
"If this is a paslode as it says in the header, you can try going to paslode.com and..."
AnonymousAnonymous posted an answer for this RTO PasLode 900420 Impulse Framing Nailer :
"you can try going to paslode.com and downloading a breakdown of this tool. The lockout bar..."
Anonymous
Saws 661 answers
Drills 603 answers
Tools & Hardware - Others 513 answers
Air Tools & Compressors 197 answers
Garden 61 answers
Hammering 34 answers
Hand Tools 21 answers Grinders 20 answers
Crafts & Hobbies 13 answers
Computers & Internet 12 answers
