1I love anything with a V8 rumble, my family and my country.
Tony Paewai posted an answer for this Welding Tools:
"Check the pressure regulator on the machine to make sure pressure is getting to the..."
Tony PaewaiTony Paewai posted an answer for this Welding Tools:
"Sounds like your setting is on stitch mode. You should be able to access this through your..."
Tony PaewaiTony Paewai posted an answer for this Welding Tools:
"Sounds like your setting is on stitch mode. You should be able to access this through your..."
Tony PaewaiTony Paewai posted an answer for this Welding Tools:
"Sounds like your setting is on stitch mode. You should be able to access this through your..."
Tony PaewaiTony Paewai posted an answer for this Welding Tools:
"A plasma stream is created when an electric arc is introduced to a gas passing through a..."
Tony Paewai
Tony Paewai posted an answer for this 1993 Toyota Land Cruiser:
"It sounds as if the clearance that the bearings normally run in have been surpassed and..."
Tony Paewai
Tony Paewai posted an answer for this 2006 Dodge Charger:
"Hi Ken, I posted a comment to my previous answer that may answer this question. There..."
Tony Paewai
Tony Paewai posted an answer for this 2002 GMC Sonoma Extended Cab:
"The easiest way is to find a larger diameter plug and re-tap the hole to fit it. This will..."
Tony Paewai
Tony Paewai posted an answer for this 2001 Mercury Cougar:
"Try checking you belt tension. That happened to me once while I was driving. Turned out to..."
Tony PaewaiTony Paewai posted an answer for this 2006 Dodge Charger:
"Check to see if a thermostat has been fitted. Follow the top radiator hose to the engine..."
Tony Paewai
Tony Paewai posted an answer for this Cars & Trucks:
"Normally a sign of a blown bulb or a dirty wire connection."
Tony Paewai
Tony Paewai posted an answer for this 1995 Oldsmobile Cutlass Supreme:
"It is not really normal on front doors, but when the door is open, if you have a look at..."
Tony PaewaiTony Paewai posted an answer for this Cars & Trucks:
"Hi Fred, one will supply power when the brake is activated and the other will be an earth."
Tony PaewaiTony Paewai posted an answer for this Cars & Trucks:
"If you mean the breather pipe on the rocker cover, then that is not a good sign. It means..."
Tony PaewaiTony Paewai posted an answer for this 2005 GMC Yukon Xl Denali:
"Check to see if the allignment is correct. The little bar that the latch hooks on to might..."
Tony Paewai
Tony Paewai posted an answer for this 2003 Pontiac Bonneville:
"Did you check the temperature range of the new thermostat? When you refilled the radiator,..."
Tony Paewai
Tony Paewai posted an answer for this 2007 Harley Davidson FLSTN Softail Deluxe:
"Blown bulb? if not, check the fuse."
Tony Paewai
Tony Paewai posted an answer for this Mamas and Papas Richmond Crib:
"There are normally little drop down tags that screw on to the legs at the top so that when..."
Tony Paewai
Tony Paewai posted an answer for this GE WBSR3140DW Top Load Washer:
"Normally you can remove the top from the agitator, where you would normally put..."
Tony Paewai
Tony Paewai posted an answer for this Motorcycles:
"I know this may sound silly, but try the kill switch in the other position."
Tony Paewai
Tony Paewai posted an answer for this 1997 Dodge Intrepid:
"The earth strap goes from any solid mount on the engine to any solid mount on the chassis...."
Tony Paewai
Tony Paewai posted an answer for this Cycling:
"Find the joiner link on the chain, remove the retainer clip followed by the link. Remove..."
Tony Paewai
Tony Paewai wrote a tip for Bobcat Miller 225 Welder Generator 907209 Or 907210:
"Use the smallest tungsten possible, ie 1/16" welds up to 115amps. Hold the tungsten..."
Tony Paewai
Tony Paewai posted an answer for this Remington Health & Beauty:
"The clippers tug and pull on the hair rather than cut the hair how can i fix my problem?"
Tony PaewaiTony Paewai posted an answer for this Remington Health & Beauty:
"Try some lubrication. If you have not got the oil it came with, use a couple of drops of..."
Tony Paewai
Tony Paewai posted an answer for this Dewalt DW364 7 - 1/4'' Heavy Duty circular saw with Electric brake and rear pivot depth of cut adjustment:
"FOUND IT DONT CUT SQAURE EVERYTHING IS TIGHT AND LOOKS STRAIGHT IM LOST ON THIS"
Tony PaewaiTony Paewai posted an answer for this Dewalt DW364 7 - 1/4'' Heavy Duty circular saw with Electric brake and rear pivot depth of cut adjustment:
"If you have removed the blade, check to make sure that you have assembled it correctly...."
Tony Paewai
Tony Paewai posted an answer for this Craftsman Saws:
"when the wheel turns on the band saw the blade slips off.i am using a old dyco brand"
Tony PaewaiTony Paewai posted an answer for this Craftsman Saws:
"You could try checking the bearings, or alignment, on the wheels to ensure that the wheels..."
Tony Paewai
Cars & Trucks 12 answers
Welding Tools 3 answers
Saws 2 answers
Motorcycles 2 answers
Cycling 1 answer
Baby Gear 1 answer
Washing Machines 1 answer
Health & Beauty 1 answer
HandBrake