1Field service repairs and phone support
Tom Luque posted an answer for this Humminbird Boating:
"Normally a new clean faced 1 KW thru-hull transducer works to 3,000 feet ( 914..."
Tom LuqueTom Luque posted an answer for this Boating:
"There is a break-away pin that connects the motor shaft to the prop. The pin is designed..."
Tom Luque
Tom Luque posted an answer for this Minn Kota Maxxum 55 Freshwater Bow Mount Trolling Motor:
"A few years ago, I once found the rubber seals through a SEARS parts web site to replace..."
Tom LuqueTom Luque posted an answer for this Boating:
"First, put a volt meter across the winch's power terminals to verify that the voltage is..."
Tom Luque
Tom Luque posted an answer for this Uniden Qt206 Thru Hull, Digital Depth Gauge:
"You might have air bubbles trapped on surface of transducer. Use soap on it so water..."
Tom LuqueTom Luque posted an answer for this Uniden Qt206 Thru Hull, Digital Depth Gauge:
"The shallow water sensitivity adjustment is set too far to an extreem. Center the..."
Tom LuqueTom Luque posted an answer for this Uniden Qt206 Thru Hull, Digital Depth Gauge:
"Check the battery power at the unit with a DC volt meter, and also use the meter's AC..."
Tom LuqueTom Luque posted an answer for this Uniden Qt206 Thru Hull, Digital Depth Gauge:
"If this unit has worked before, and suddenly looks upside down, you are most likely seeing..."
Tom LuqueTom Luque posted an answer for this Boating:
"Is there a rating plate showing voltage, amps, watts? This information is required to know..."
Tom Luque
Boating 9 answers
