t_mike posted an answer for this Craftsman Drills:
"Hi Charles! The chuck is fixed to the spindle by a bolt (with Ph2 or hex head), you can..."
t_mike posted an answer for this Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill:
"Two of my Makita 18v Nicad batterys have stopped charging is there a way to repair them or..."
t_mike posted an answer for this Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill:
"For NiCd and NiMH batteries - check the battery voltage (for a good battery it is ~ 19,..."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"i need an assembly diagram for a makita 6349d cos its in peices and i dont no how to get..."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"http://www.makita.com/en-us/Assets/Images/Products/6349DWDE/parts_breakdowns/6349DWDE..."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"Inserted small drill bit and tightened. Drilled hole. Now I cannot loosen the chuck."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"You may try to put a thick soft metal pipe (aluminium or copper) over the drill bit..."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"I don't know if its a battery problem but both batteries fully charged run the drill at..."
t_mike posted an answer for this Makita 12 Volt Cordless Drill/Driver Kit:
"It can be a problem with the batteries - if you check their voltage and it is lower than..."