Jay Scruggs posted a question about Maytag Washing Machines:
"Maytag Neptune won't drain"
Jay Scruggs posted a question about Maytag Neptune MAH5500B Front Load Washer:
"how to replace the drain boot on a maytag front load washer"
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"It sounds as if something mechanically serious happened. Call a repairman and get a..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"Some object like a coin is most likely stuck in the pump or drain hoses. There are..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"The pump is accessable through the back panel. Simply remove two screws and the cover. ..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"Unhook the water hoses at the wall and check to make sure the screens are free of debris. ..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"Could be the screens in the hoses at the wall hook ups are plugged or restricted. Check..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"Could be the screens in the hoses at the wall hook ups are plugged or restricted. Check..."
Jay Scruggs posted an answer for this Maytag Washing Machines:
"Maytag front-load washers have a problem with the pump. It is prone to getting objects in..."
Jay Scruggs posted an answer for this Maytag Neptune MAH9700 Front Load Washer:
"The drain hose can also have an object in it. Remove the hose and run a rod or something..."
Jay Scruggs posted an answer for this GE WBSR3140DW Top Load Washer:
"The nf code means the water is not flowing. Check the water valves. Check the screens in..."
Jay Scruggs posted an answer for this Maytag Neptune MAH5500B Front Load Washer:
"The pump and its various hoses are easily accessable through the back panel. The boot can..."
Jay Scruggs posted a question about 1993 Ford Explorer Limited:
"93 Ford explorer pushrod: Engine code 327. Have replaced most of the vacuum controls, when..."