Press enter to search.
Robert Wood posted an answer for this Cars & Trucks:
"Gas,brake or clutch pedal ?"
Robert Wood posted an answer for this BMW Cars & Trucks:
"Does it have an automatic transmission ? The lockup converter may not be disengaging when..."
Robert Wood posted an answer for this Saturn Cars & Trucks:
"Broken off in threaded bracket ?"
"And check out the braking system and tires"
Robert Wood posted an answer for this Pontiac Cars & Trucks:
"The ignition switch contacts may be worn in the run and crank positions ."
Robert Wood posted an answer for this Toyota Cars & Trucks:
"Low fuel pressure or volume from a weak pump, restricted filter or restricted injectors ."
Robert Wood posted an answer for this Honda Motorcycles:
"If it will not spin over at all I'd check the battery and starter connections and battery..."
"Advanced ignition from bad knock sensor, stuck closed EGR valve or clogged passageway ...."
"No man has the answer to that :-("
Robert Wood posted an answer for this Dodge Cars & Trucks:
"Strong vacuum cleaner or needle nose pliers ."
Robert Wood posted an answer for this Ford Cars & Trucks:
"It would not turn over at all or turn over but would not run ? Had it acted different..."
Robert Wood posted an answer for this Cadillac Cars & Trucks:
"Did your thermostat have this oring on it ?"
"What is the TPS output measurement ?"
"Vehicle information needed"
"The codes do need to be read . A flashing light is usually a misfire that can destroy the..."
"Struts may be bad ."
"Bad fuel, low fuel pressure, MAF, restricted exhaust, restricted injectors ."
Robert Wood posted an answer for this Audi Cars & Trucks:
"Fuel injector and compression issues are possible ."
"If they do it when hitting bumps I'd look for bad or loose connections . Wiggle wiring..."
"As Vernon stated check for jumped timing causing kickback ."
"Worn out or dry rubber control arm bushing ."
"Hall effect sensor in distributor may be what your looking for ."
"Have you tested for power to the connection on the non working bulb ? Some have separate..."
"Was it random misfire codes or cylinder specific ? If specific how many cylinders ?"
"Loose connections at the motor. Have you tried bumping the area near the fan with your..."
Robert Wood posted an answer for this Chrysler Cars & Trucks:
"The programming for the manifold pressure sensor is different on forced induction and may..."
"As Steve said and if it's at an intersection please hit your brakes ."
Load more activity...
599,165 people helped
View all achievements