Pete posted an answer for this Pool & Spa:
"make sure pool is running long enough and check stabilizer level"
Pete posted an answer for this Pentair One - Speed 1hp 115v Dynamo Pump without Cord:
"I have a Pentair 2.0 pump that I am trying to remove from the impellar. The shaft turns..."
Pete posted an answer for this Pentair One - Speed 1hp 115v Dynamo Pump without Cord:
"The impeller is threaded onto the motor shaft. On 2hp motors and above, there is usually a..."
Pete posted an answer for this Sta Rite Pool & Spa:
"Your local pool store sells a bag that goes inside the basket in the pump. This should..."
Pete posted an answer for this Sta Rite Pool & Spa:
"I have a Sta-rite Max-E-Glas system in my pool. Every two to three weeks I have to dis..."
Pete posted an answer for this Hayward 1 12 Hp Super Swimming Pool Pump Sp2610x15:
"No prime = either impeller problem, air leak, or blockage on output(bad filter or bad..."
Pete posted an answer for this Hayward 1 12 Hp Super Swimming Pool Pump Sp2610x15:
"Done every thing suggested. Still doenst prime. should I fill sand filter?"
Pete posted an answer for this Hayward SAND FILTER, PRO SERIES:
"Remove the handle assembly and replace the spider gasket, which is under the handle..."
Pete posted an answer for this Hayward SAND FILTER, PRO SERIES:
"water is leaking out the backwash while in filter setting. I removed valve handle and do..."
Pete posted an answer for this AO Smith A O Smith Motors A O Smith 3/4hp 115/230v Ee Square Flange Motor - Qc1072:
"The impeller is just screwed on the shaft. COUNTERCLOCKWISE to remove. Some have a screw..."
Pete posted an answer for this AO Smith A O Smith Motors A O Smith 3/4hp 115/230v Ee Square Flange Motor - Qc1072:
"Hi, I have a QC 1072 A.O. Smith pool pump motor. How to get the impeller off? Which..."
Pete posted an answer for this Pool & Spa:
"When the pool and spa are in the off postion. Over the next two hours the spa drains down..."
Pete posted an answer for this Pool & Spa:
"Replace the check valve and it will solve the problem. (it's located inline running to..."
Pete posted an answer for this Sta Rite 1 HP Sta-Rite Pump: 1.5" in/out, Center Discharge, 240V, w/Hair & Lint Pot:
"low pressure"
Pete posted an answer for this Sta Rite 1 HP Sta-Rite Pump: 1.5" in/out, Center Discharge, 240V, w/Hair & Lint Pot:
"Low pressure indicates a problem on the input side of the pump. Possibilities..."
Pete posted an answer for this Emerson THREADED SHAFT UP RATED - 1.00 HP - EB228:
"I had a Smith 1HP pool pump with a square flange on my Haywwod sand filter. After 12 years..."
Pete posted an answer for this Emerson THREADED SHAFT UP RATED - 1.00 HP - EB228:
"Sounds like there is an impeller problem. A 1hp emerson should be fine. Take it apart and..."
Pete posted an answer for this Pentair Fns Plus 48 sqft De Pool Filter (In Ground Pool):
"The lid will not sit back over the o-ring securely. Thus the band holding the top and..."
Pete posted an answer for this Pentair Fns Plus 48 sqft De Pool Filter (In Ground Pool):
"I wish there was an easy fix for you. I have had to have two people pushing down on the..."
Pete posted an answer for this Zodiac BARRACUDA G3 IN-GRND CLEANER:
"This happens when the skirt gets thin. A new one will definitely solve the problem."
Pete posted an answer for this Zodiac BARRACUDA G3 IN-GRND CLEANER:
"My Barracuda skirt keeps folder under and stops the barracuda working. The skirt looks..."
Pete posted an answer for this Pentair Pool & Spa:
"I'm trying to drain a pool that's Ben sitting for years full of nasty water. Pump works..."
Pete posted an answer for this Pentair Pool & Spa:
"Sounds like you're trying to pull water from skimmer and main drain. Soon as the level..."
Pete posted an answer for this Zodiac Pacer Pool Cleaner:
"The bottom of the unit has slight tears in the diaphram and the bottom flaps come off in..."
Pete posted an answer for this Zodiac Pacer Pool Cleaner:
"You can buy any part that is removable on that cleaner."
Pete posted an answer for this Pentair 2" Pvc, 3 Way Lube Free Diverter Valve, with 2.5" Slip Outside:
"How do I know if I have a 1 1/2" - 2" or 2" - 2 1/2" valve? The pvc..."
Pete posted an answer for this Pentair 2" Pvc, 3 Way Lube Free Diverter Valve, with 2.5" Slip Outside:
"That would make it a 2" valve."
Pete posted an answer for this Pool & Spa:
"Remove diffuser. Remove rear cover from motor. Hold shaft with either a screwdriver if..."
Pete posted an answer for this Pool & Spa:
"HOW DO YOU REMOVE AN IMPELLER FROM A FROM SHAFT"
Pete posted an answer for this Hayward Pool & Spa:
"How do I lock the motor shaft so I can remove the impeller?"
Pete posted an answer for this Hayward Pool & Spa:
"Remove back cover. Shaft has a flat on it which an be held with a half inch open end..."