i'm a big deal
Kenneth posted an answer for this Carlon Home Products Ballast Light Control, 1800 Watts:
"yes the other wires where probably for switching half of the bulbs in the fixture"
Kenneth posted an answer for this Lincoln Electric Ranger Gxt 250 Amp Generator/Welder 125 Volt, 250 Amp, Model# K2382 2:
"there are oil pressure and sometime temperature sensors on the motor. you can find these..."
Kenneth posted an answer for this Generac 5622 GP Series GP5000 6,250 Watt 389cc OHV Portable Gas Powered Gen:
"fuel problem, the float in the carborator is stuck, if you tap on the carborator bowl it..."
Kenneth posted an answer for this Flotec Simer//Omni 2957 Submersible Sump Pump with Piggyback Tethered Vertic:
"it sounds like it could be a bad float switch but most of the time the water isn't high..."
Kenneth posted an answer for this Leviton 8299 Combination Switch / Smart lock GFCI Outlet:
"power coming in from the breaker box: black wire will go to line-hot screw, and the white..."
Kenneth posted an answer for this NRS Paslode 501000 Powermaster Plus Clipped Head Nailer:
"it's usually one of the "O" rings not sealing the air completely. it will probably get..."
Kenneth posted an answer for this Hitachi EC12 Portable Electric 2hp Air Compressor, Oil Lubricated:
"you should take the cover off where the pressure switch is (the on off switch) and see if..."
44,955 people helped