Press enter to search.
MissFixIt828 posted an answer for this Singer Sewing Machines:
"Try changing your needle. A dull/damaged/bent needle can cause timing and tension issues...."
MissFixIt828 posted an answer for this Sewing Machines:
"Your needle could be bent.Trying changing your needle and move the hand wheel by hand to..."
MissFixIt828 posted an answer for this PfaFF Sewing Machines:
"Could be an electronic issue. Take it to your local Pfaff dealer for an estimate on..."
"The timing is probably out."
MissFixIt828 posted an answer for this Kenmore Sewing Machines:
"Your reverse assembly needs oil. You should probably take it in to be serviced."
"If it is bunching and looping underneath, it's because either the machine isn't threaded..."
MissFixIt828 posted an answer for this PfaFF Quilt & Craft Pro 7530:
"It's probably seizing up. You should take it in to be serviced."
"The feed assembly is starting to seize. You will have to take it in to be serviced"
"Take it to your pfaff dealer."
MissFixIt828 posted an answer for this Bernina Sewing Machines:
"Make sure your feed dogs are not set for free motion or darning. Once you switch them to..."
"Unfortunately you probably need a new board and the parts are no longer available."
MissFixIt828 posted an answer for this Rex RX-1804:
"The Janome even feed foot will work with your machine..."
"When the machine is set to straight stitch, adjust the stitch width to the position you..."
MissFixIt828 posted an answer for this Brother SQ9000FS 80/120 Stitch & Alpha FONT Computer Sewing Machine, 8x1StepBH 7mmZZ WalkDarn1/4Foot 10Feet Theader 10Lb ExtTable 2CasesXR9000 XR9500:
"Make sure presser foot shank is installed correct. The presser foot bar may also need some..."
"Take it to your local Husqvarna dealer for servicing"
"The hook timing is out. If it's very new I'm assuming it's still under warranty. Take it..."
"Why are you trying to take it apart? What is it doing or not doing?"
"Try changing your needle. If it still happens with a new needle, the timing is probably..."
"I think you have to kind of slide it from the back towards you. They are a bit tricky"
"All sewing machines thread a bit different. Which machine do you have?"
"Sounds like either the motor is dead or the foot control needs to be replaced. If your..."
"If it's an electronic presser foot lift you will have to take it to a babylock dealer for..."
"Take it to your pfaff dealer. The needle clamp may be worn from over tightening the screw."
"You should take it to a repair tech and see if they will give you a free estimate. If your..."
"I don't recommend you take this machine apart. I am a trained service tech and it's a task..."
MissFixIt828 posted an answer for this Husqvarna Sewing Machines:
"When the machine is threaded, raise the presser foot. The tension disks will release when..."
"You need a new position bracket. What's happened is you forgot to or incorrectly threaded..."
"Your machine needs to be serviced. Sounds like it is seizing or may have a broken gear."
"Your machine needs to be serviced. The reverse assembly is probably starting to seize."
MissFixIt828 posted an answer for this Husqvarna Viking 1:
"Your screen may need to be replaced. Take it to a husqvarna dealer and see if you can get..."
Load more activity...
14,493 people helped
View all achievements