1
Marc Donnelly posted an answer for this Combi Ovens:
"Just run the Cleanjet cycle again. If the problem is fixed, the error will go..."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Order a water and drain connection kit from Rational 60.70.464"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Seems like the motor is drawing too much current"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"The motor should start as soon as the door is closed. to check the motor, I need to know..."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"The potentiometer for the timer/core temp is defective."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"The main fan motor is defective"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"It looks like a faulty gas ignition module"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Press timer key to delete the error after you changed the battery"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"The compute Doe t see the motor. Probably the motor is no more good."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Most likely the core temperature probe is faulty"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Probably faulty relays"
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Either you have scale buildup on the water level probe or a faulty filling valve."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Water is filling too slowly. Most likely a bad y1 filling solonoid valve."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"From top to bottom, press the 1st, 2nd and 4th button simultaneously."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"You have a defective solonoid valve. Usually it is the quench valve (the blue one)."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"Service 10 is usually caused by a blocked or defective steam generator emptying..."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"If it is a Rational CM or CMP gas oven, then there is a problem with the ignition module."
Marc DonnellyMarc Donnelly posted an answer for this Combi Ovens:
"You have a defective mode switch"
Marc Donnelly
Ovens 18 answers
